• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

New Parts For April-MAY 2008

Joined
6 February 2001
Messages
801
Location
San Diego, CA, USA
<b>NEW PARTS FOR APRIL - MAY 2008</b>

<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2358#tab1">COOLant Tank: Dali Round style Ironside tanks: polished</a> $239.00

Nice shiny round style COOLant tank with the shine built in for those of you whose life is all about going in circles..

<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-ironside-coolant-tank-round.image.jpg" alt="Dali Round style Ironside COOLant tank" /></h1>

Pressure tested to 30PSI, the 0.125" thick "armor" plate aluminum side, top and bottom sections (0.090" tanks can crack and leak) are welded together by our master craftsmen; then polished to perfection to match the rest of your polished goodies.

Internal slosh "baffle" for those of you that think you are fast enough need it. Decorative polished billet cap cover (pictured) and regular OEM spec pressure cap included.

In stock for immediate shipping. Red and Black powder versions in a week.

<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2049">New coolant tank hoses</a> in stock if you need to freshen up.

******

<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2348">Dali Short Ram INtake: 1991-2005</a> $150.00

Nice shiny "short ram" style INtake with the APEXi filter, (our fav aftermarket filter since it <a href="http://www.daliracing.com/v666-5/info/induction_kit/induction_kit.cfm">actually filters</a>).

Polished 6061 pipe, black silicone connector with stylish stainless T-bolt clamps. Currently in stock for the 1991-2001, I'll get around to making some for the 2002+ as soon as someone needs one. Installed shots coming along as soon as I get them.

<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/apexi-intake-by-daliracing.image.jpg" alt="Dali Short Ram INtake: 1991-2005" /></h1>

Not CARB approved, but preserves your emissions connections, so you can still sleep at night.

**Look for our 2008 10 Intake review-dyno comparo to be published in a magazine later this spring....**

******

<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2356">Dali Water-Air Intercooler Kit Heat Exchanger</a> $325.00

Just the water/air heat exchanger from our BOOSTZILLA and GruppeM intercooler kits, the rest of the piping and etc is up to you. Built specifically for the NSX, mounts to existing holes in the nose of the car. Make your homemade intercooler kit actually work. All aluminum, pressure tested, AN fittings pictured in the Details Shot supplied.

<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-intercooler-heat-exchanger.image.jpg" alt="Dali water-air Intercooler Kit Heat Exchanger" /></h1>

******
<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2355">Gaskets for Dali Test Pipes: 1991-1994</a> $20.00

Just a set of replacement gaskets for the 1991-1994 test pipes. Quality gaskets made for us with internal fire ring. Fits 2.0 and 2.25" ID Dali pipes, might also work with other makes. (mounting hardware not included, what you see in the picture is what you get)

<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-test-pipes-gaskets.image.jpg" alt="exhaust gaskets" /></h1>
******

<p>
<B>SNEAK PEEK!</b>
</p>
<a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2357">COOLant tank: Dali Ironside Tank with Integral Oil Catch Can</a> $279.00

<h1 align="center"><img src="http://www.daliracing.com/v666-5/catalog/x-images/dali-coolant-tank-with-catch-can-preview.image.jpg" alt="Dali Ironside COOLant Tank with integrated Oil catch" /></h1>

Our prototype Ironside COOLant Tank with integrated Oil catch can is in testing mode - I ought to have a few in 2 weeks in the usual red and black powder + polished finishes.

Supplied with high pressure 20PSI cap for real racers, a breather filter, and silicone tubing on the drain valve in the catch can section. Sight "glass" welded into the catch can section to show you what is pumping out of your motor that shouldn't be. (Those of you still running BBSC's might get one)

Crankcase fitting kits for venting your excess crankcase pressure (and oil fumes) into the tank instead of all over the track or back window available <a href="http://www.daliracing.com/v666-5/catalog/index_browse_part.cfm?focus=2359">here</a>, or you can make your own.

******

Anything else that happens this month will be <a href="http://www.daliracing.com/v666-5/info/whats_new.cfm">posted here</a>.

Want to <a href="http://www.daliracing.com/v666-5/info/email_signup.cfm">sign up </a>for our monthly email alerts? It takes all the work out of keeping up with the new bits... :biggrin:
 
The RED and Black powder round COOLant tanks referenced above arrived today.

dali-coolant-tank-ironside-round-red.image.jpg



and

dali-coolant-tank-ironside-round-black.image.jpg



Pressure tested to 30PSI, the 0.125" thick "armor" plate aluminum side, top and bottom sections (0.090" tanks can crack and leak) are welded together by our master craftsmen; then powdercoated to perfection to match your valve covers.

Internal slosh "baffle" for those of you that think you are fast enough need it. Decorative machine finish billet pressure cap cover (pictured) and regular OEM spec pressure cap included.

In stock for immediate shipping.
 
I've had about 10 successful orders with Dali and not a single issue.

I was in the same boat. I actually used to defend the guy when people posted threads about his tendency to rip people off. You will have a decent experience with Dali as long as your order is in stock and you are not looking for a return or for any type of customer service. But as soon as you order something that's out of stock, or you try to return a defective part, the guy will not respond. And if he does respond, his behavior is bizarre, offensive and accusatory. I tried to return a product for a $175 refund and he accused me (a long time customer of his) of lying and trying to send back a broken product. I never got my money back. I hope the guy used my money to get his medication.
 
Back
Top