Bros, need some help here. Bought a NSX-R pedal set from Louis and I get how the clutch and brake pedals need to be drilled and pop riveted for the covers but replacing the accelerator pedal arm appears to be a horse of a different color. I have some instructions that show the entire pedal assembly coming out like it's bolted to the firewall but it must be for a NA1 because my '97 appears to be spot-welded to a pedal bracket and it ain't coming out in one piece.
Looked in the FSM to see if there is a diagram to take the springs, cable & bolts out to remove just the arm but no joy there either. I'm sure someone on here has done this swap before, I'm just afraid to attempt it with no type of schematic or diagram to be able to put it back together correctly. Doesn't help that I'm half-blind and can't see a damn thing up close. Can someone here help an old man out? Thanks---
Looked in the FSM to see if there is a diagram to take the springs, cable & bolts out to remove just the arm but no joy there either. I'm sure someone on here has done this swap before, I'm just afraid to attempt it with no type of schematic or diagram to be able to put it back together correctly. Doesn't help that I'm half-blind and can't see a damn thing up close. Can someone here help an old man out? Thanks---
