Nsx wheel spacer front spec

[Black NSX F1]

Hey guys, just install my custom front BBK. I honestly believe I have 1/16th clearance which is enough but want to be sure. So I will need a 3mm spacer (1/8th). What's the hub centeric bore? 70.1 mm spacer is what I need to buy? Where do I buy a good brand spacer?

- - - Updated - - -

I don't know why the picture is sideways, sorry guys

 

[Hapa88]

For just 3mm, you can use any brand spacer even the universal ones because the hub is still longer than the spacer itself (~6mm).
If you're really that picky, then hubcentric 70.1mm for 5x114.3 and 3mm thickness is what you need to get. H&R, Project Kics, and Ichiba are good brands, but honestly at 3mm, they should all work fine.

 

[Black NSX F1]

Yea, thanks for your input, I was thinking the same. It is only 3mm which I think really should affect the thread being shorter when the wheels go on.

 

[anesthesia]

I have a set laying around I never use and will most likely never use, free to you if you want them, pM me

 

[Black NSX F1]

I have a set laying around I never use and will most likely never use, free to you if you want them, pM me

PM sent!