ok, last offset question. 19x10 with 22 offset?

[raffi.awakim]

Ive seen one of the members that fit a 19x10 with a 24 offset, has anyone fit a 19x10 with 22offset?

I think its a 350z offset, but i really want some enkei rpf1s but a little wider.


thanks much

 

[Zishan]

Ive seen one of the members that fit a 19x10 with a 24 offset, has anyone fit a 19x10 with 22offset?

I think its a 350z offset, but i really want some enkei rpf1s but a little wider.


thanks much

That is going to stick out past the fender. I have 19x10 42 offset. Maybe if your car is slammed with lots of negative camber.

 

[Hapa88]

Here's a picture of 19x9.5 +23 (equivalent to 19x10 +29). This setup doesn't rub. A +22 will stick out about another 7mm more and I would think it would rub.

 

[raffi.awakim]

so what is the offset i need to have a 19x10 in the rear. by the way, i want it flush with the fender

 

[angus]

19x10 +40 ,depending on tire / ride height / camber , you could run the 19x10+22 if you had a wheel shop machine the wheel pad -7mm then press inserts in to reinforce the holes , I've had this done on a few special occasions , if you really want them . I also have considered the rpf1 , also you'll probably need a smaller tire (255 - or narrower)


Tough call...

 

[KooLaid]

I'd say 35-40

 

[RacingHeart]

20x10,5" +22 Work Meisters:

If you stretch the tires you should be able to run a 10" +22 wheel.

Im going to run 19x9" +6 rear on my car.

 

[enkrypt3d]

stretched tires just dont look right to me ....

 

[Hapa88]

19x10 +35 below:

19x10 +29 below:

Depending on your definition of "flush" it's probably an offset somewhere between those two.

 

[raffi.awakim]

20x10,5" +22 Work Meisters:

If you stretch the tires you should be able to run a 10" +22 wheel.

Im going to run 19x9" +6 rear on my car.

i personally like the stretch look. so, it is possible to fit a 10" with a 22 offset..

what tire size should i use for the stretch look?

 

[RacingHeart]

i personally like the stretch look. so, it is possible to fit a 10" with a 22 offset..

what tire size should i use for the stretch look?

I have no personal experience yet.

But Scaransx is running a wild setup on his NSX and he recommended running 245 on a 10" +20 wheel.

 

[nsx24]

That is going to stick out past the fender. I have 19x10 42 offset. Maybe if your car is slammed with lots of negative camber.

Sorry to jump off topic, but WOW does your car look good(from your avitar) what suspension setup are you running? Any more pics of the car? How about the wheels, size-offsets?

 

[Zishan]

Sorry to jump off topic, but WOW does your car look good(from your avitar) what suspension setup are you running? Any more pics of the car? How about the wheels, size-offsets?

I don't have many pictures, but you can see some on this post.

I recently installed Tein coilovers. I already have the Ayotte Camber kit. The wheels are old school Racing Hart M5's 18/19 set up. The car only looks good because it's lowered so much. Thanks for the compliment. :smile:

 

[spase]

Hay Zishan, same height as mine

 

[Zishan]

Hay Zishan, same height as mineView attachment 45455

Mine's lower! :tongue:

j/k

Btw, I like the modern look of your yard, driveway, etc. :smile:

 

[spase]

Thanks. :biggrin: