• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

ok, last offset question. 19x10 with 22 offset?

Joined
18 June 2008
Messages
120
Location
fenicks
Ive seen one of the members that fit a 19x10 with a 24 offset, has anyone fit a 19x10 with 22offset?

I think its a 350z offset, but i really want some enkei rpf1s but a little wider.


thanks much
 
Ive seen one of the members that fit a 19x10 with a 24 offset, has anyone fit a 19x10 with 22offset?

I think its a 350z offset, but i really want some enkei rpf1s but a little wider.


thanks much

That is going to stick out past the fender. I have 19x10 42 offset. Maybe if your car is slammed with lots of negative camber.
 
Here's a picture of 19x9.5 +23 (equivalent to 19x10 +29). This setup doesn't rub. A +22 will stick out about another 7mm more and I would think it would rub.

IMG_0516.jpg
 
Last edited:
so what is the offset i need to have a 19x10 in the rear. by the way, i want it flush with the fender
 
19x10 +40 ,depending on tire / ride height / camber , you could run the 19x10+22 if you had a wheel shop machine the wheel pad -7mm then press inserts in to reinforce the holes , I've had this done on a few special occasions , if you really want them . I also have considered the rpf1 , also you'll probably need a smaller tire (255 - or narrower)


Tough call...
 
20x10,5" +22 Work Meisters:
2230742610042720342S600x600Q85.jpg



If you stretch the tires you should be able to run a 10" +22 wheel.

Im going to run 19x9" +6 rear on my car.
 
Last edited:
stretched tires just dont look right to me ....
 
19x10 +35 below:
IMG_05031.jpg


19x10 +29 below:
IMG_0516.jpg



Depending on your definition of "flush" it's probably an offset somewhere between those two.
 
20x10,5" +22 Work Meisters:
2230742610042720342S600x600Q85.jpg



If you stretch the tires you should be able to run a 10" +22 wheel.

Im going to run 19x9" +6 rear on my car.


i personally like the stretch look. so, it is possible to fit a 10" with a 22 offset..

what tire size should i use for the stretch look?
 
i personally like the stretch look. so, it is possible to fit a 10" with a 22 offset..

what tire size should i use for the stretch look?
I have no personal experience yet.

But Scaransx is running a wild setup on his NSX and he recommended running 245 on a 10" +20 wheel.
 
That is going to stick out past the fender. I have 19x10 42 offset. Maybe if your car is slammed with lots of negative camber.
Sorry to jump off topic, but WOW :eek:does your car look good(from your avitar) what suspension setup are you running? Any more pics of the car? How about the wheels, size-offsets?
 
Sorry to jump off topic, but WOW :eek:does your car look good(from your avitar) what suspension setup are you running? Any more pics of the car? How about the wheels, size-offsets?

I don't have many pictures, but you can see some on this post.

I recently installed Tein coilovers. I already have the Ayotte Camber kit. The wheels are old school Racing Hart M5's 18/19 set up. The car only looks good because it's lowered so much. Thanks for the compliment. :smile:
 
Hay Zishan, same height as mineDSC02656.jpg
 
Thanks. :biggrin:
 
Back
Top