drew/larry -
i just figured out a bastard way. I can take a 5mm socket and cut off the correct allen wrench and insert, which turns it into an allen socket, then use adapters to step it up to my torque wrench size. Hold the nut with an open end wrench or Gearwrench socket (from Craftsman) and apply correct torque that way. Does that make sense? It would've worked great but since my 5mm socket is 1/4" and I stepped it up to 1/2", I broke the 1/4" socket. I may have it torqued more than the factory recommended 22ft lbs, I think, from my impact wrench. However, I may leave it at that for now unless someone tells me it'll hurt something. -RJ