tips/tricks to putting on suspension??

Joined
17 July 2000
Messages
59
I just picked up a set of tein remote resevoir coilovers and was wondering if there's any special trick to putting these on or if it's pretty straight forward. I've put suspension on before, so i'm a semi-competent wrencher and i have the shop manual as well, but there's always shortcuts. Anyone?

thanks
 
In the rear........ Although it looks as if you need to remove the four bolts that attach the upper control arm; you do not. The suspension will swing well out of the way by prying it down. These bolts are a real bitch to put back in if you remove them and they can be stripped..... so just swing the whole arm down out of the way.... That may be obvious to some, but other posts and do-it-yourself instructions say that you remove these..... don't and save yourself some headache.

------------------
Todd Arnold
Pls. visit my newly redone NSX site w/ lots of info and pics. Brand new classifieds and Message board. @
http://www.geocities.com/nsxcessive/index.html
 
Back
Top