Very last ZeToolBox Carbon Fiber V2 Sub Enclosure regular enclosures still available!
The ZetoolBox Sub Enclosure V2 in black carbon fiber!!
This is the very last one that will be made!
First $400 gets it!!
PM me your email address for install info!
The V2 is designed to hold the JL10W1 or the 10W3 with a spacer, or simular. Has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passanger side, if that matters!
V2 in Black Carbon Fiber $400.00 + shipping & clips
V2 in Black gel coat $300.00 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/cf_v2_1.JPG" />
<img src="http://www.nsxprime.com/photopost/data/500/cf_v2_2_1.JPG" />
You can get the V3 designed to not loose any foot space and holds the shallow mount SWS10x made by Earthquake. Has about .35 cu. ft. of air space!
V3 $300 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final_front.JPG" />
Set of nut clips $20 while supplies last!
I can set them up and assemble if needed, just pm for details.
pm me as emails from here do not go through.
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman
The ZetoolBox Sub Enclosure V2 in black carbon fiber!!
This is the very last one that will be made!
First $400 gets it!!
PM me your email address for install info!
The V2 is designed to hold the JL10W1 or the 10W3 with a spacer, or simular. Has like .67 cu. ft. of air space. This one has a loss of about 3" of leg space for the passanger side, if that matters!
V2 in Black Carbon Fiber $400.00 + shipping & clips
V2 in Black gel coat $300.00 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/cf_v2_1.JPG" />
<img src="http://www.nsxprime.com/photopost/data/500/cf_v2_2_1.JPG" />
You can get the V3 designed to not loose any foot space and holds the shallow mount SWS10x made by Earthquake. Has about .35 cu. ft. of air space!
V3 $300 + shipping & clips
<img src="http://www.nsxprime.com/photopost/data/500/10555V3_final_front.JPG" />
Set of nut clips $20 while supplies last!
I can set them up and assemble if needed, just pm for details.
pm me as emails from here do not go through.
Enjoy,
Z
Link to the vendor page: http://nsxprime.com/wiki/Zetoolman
Last edited:
