wheel width/offset question for very low car

[vinay]

I am looking to order some new wheels. I'm planning to get 18s and 19s. However, I want to make sure I minimize any rubbing issues by selecting the appropriate width and offset. My car is very low (sorry no pic). I almost get a finger under the wheel well. Any advice? Does anyone know what widths/offsets "nsxslammed" used?

Thanks!

 

[Hapa88]

18x8 +38 with a 215/35 tire
19x10 +35 with a 275/30 tire should have no rubbing issues.

 

[vinay]

18x8 +38 with a 215/35 tire
19x10 +35 with a 275/30 tire should have no rubbing issues.

Thanks, so much! Exactly what I was looking for.

 

[evof575gtc]

"nsxslammed" has his wheels tucked,
im not so sure you can use those offsets to get the same effect,
because those offset measurements are pretty low for the width and bring the rim itself all the way to the edge of the fender.

 

[vinay]

"nsxslammed" has his wheels tucked,
im not so sure you can use those offsets to get the same effect,
because those offset measurements are pretty low for the width and bring the rim itself all the way to the edge of the fender.

Yes, that was my concern exactly. I wasn't sure if the additional camber (from lowering the car) would push the top in enough to clear the fender better (with the "standard" aftermarket offset). ...or did NSXSLAMMED get a custom offset to address what you stated above?

Thanks!