Wheels that fit a Big Brake Kit for the NSX

[RYU]

I was looking at this thread and was hoping for an updated version with today's choices of BBK friendly wheels.

Anyone care to share your manufacturer/model/size/offset and which BBK kit you're using? Pictures would be helpful also. It would be great to have that info in one thread.

----------------------
This is my only contribution for now and was for test fitment only. Hoping to see other options in either 17" or 18".

SSR Competion - Front - 17x7.5 +42 215x40x17
BBK - PBR Z06 C6 Calipers - 400mm Rotor

 

[EAC]

Volk CE28N's with Stoptechs Front & Back with E-Brake Option.

Wheels are CE28N. Front are 17x8 w/offset 38 (no spacer needed 1.5mm clearance BBK,tire size 215-45-17). Rear are 18x9.5 w/ offset 34 (no spacer needed no rubbing 3mm clearance to BBK - tire size 265-35-18)

 

[davidf]

You should steer away from the Rotora kits. Good quality but the rear calipers are huge. Actually they interchange with the fronts. They would not even near fit behind my rear iforges whereas I feel Stoptech/Brembo's likely would since their rear calipers are a tad smaller than their fronts. I'm on the fence about some concave wheels so I can install my rear kit but still quite fond of my old iforges.

 

[SOURCE 1]

So If I am reading all this correctly.. Since the Stoptech kit is wider than a brembo indy kit would a 18x7.5 + 38 work with the indy kit?

 

[angus]

I am going to say no but there is no real way to tell without test fitting.