White face gauges for the NSX

[jagtiger]

Does anybody have a picture of the white face/indiglo reverse gauges installed? I just bought this INDIGLO GAUGE off ebay and would like to know how difficult it is to install. Anybody installed something similar?
What's your impression? Thanks in advance!

 

[91nsxbaby]

hi kinda hard/when i did mine, i took the time to do it. you have to adjust your steering wheel colum Bolt.it take about 5 hours to do it. beacuse you have to line up the wire's to make sure it in order and jig around the Gauges to make sure that it will fit right .. lots of work... call me if you any question .be happy to help you out ..

 

[JCRowan]

I have the reverse gauges with amber lighting. They are fantastic and I really like the look. Sorry I don't have a picture of it for you though.

JC

 

[4AU4LIFE]

tough job

I agree with 91. They do take a long time to install. Pulling the cluster out and all the wires and running more wires and getting gauges on and clearing the needles and not breaking them and making sure the gas is reading correctly afterwards.....I know that was a run on but it does just keep going.

 

[Meeyatch1]

I would like to see pictures of white faced gauges of different types. Anyone?

 

[4AU4LIFE]

I would like to see pictures of white faced gauges of different types.

PM me your email addy

 

[AndyH]

I would like to see pictures of white faced gauges of different types. Anyone?

Here we go:

 

[Meeyatch1]

PM me your email addy

PM sent...thank you!

 

[Meeyatch1]

Here we go:

Looks good....can they be had with the correct redline and without 'NSX-R' on them?

 

[jagtiger]

Here we go:

Nice looking gauges!
Where did you buy it?

Regards

 

[jagtiger]

hi kinda hard/when i did mine, i took the time to do it. you have to adjust your steering wheel colum Bolt.it take about 5 hours to do it. beacuse you have to line up the wire's to make sure it in order and jig around the Gauges to make sure that it will fit right .. lots of work... call me if you any question .be happy to help you out 303-975-9328 thong

Thanks for the advice! I'll definitely contact you if I ran into troubles installing it..

Any pics of the gauges?

 

[jagtiger]

I'm currently doing my white face/reverse gauge install. Removing the gauge Cluster was not easy. It took me 2 hours . For some reason the service manual is not that accurate. Anyway, I think it's all worth the effort.

 

[demigod]

I'm currently doing my white face/reverse gauge install. Removing the gauge Cluster was not easy. It took me 2 hours . For some reason the service manual is not that accurate. Anyway, I think it's all worth the effort.

Jagtiger, looks nice. Did you have to remove the needles or do these just slide over? Thanks.

 

[jagtiger]

Jagtiger, looks nice. Did you have to remove the needles or do these just slide over? Thanks.

Demigod,

Thanks! These are slide over gauges. It's tricky putting in - hopefully I didnt damage anyhting by moving the needles manually.

 

[91nsxbaby]

Look like your doing a great job there.. got all the Gauges in.. Now the hard part is, running the wires in 1 direction.. good luck..

 

[ajnsx]

they are nice looking jagtiger. I need/want km/h ones, but the feel's ones are a tad expensive what the hey, i'll get 'em anyways

 

[jagtiger]

Thanks for the replies - guys!

I did have problem with the wirings but finally got it working. The indiglo reverse gauge is just awesome(not bad for $49 bucks).