Will these fit? Rims from 350z track

[kjhNSXdreamer]

Hey,

A local guy is selling his 350z stock track rims, Ray Engineering

fronts: 18x8- 5x114.3 18.2 lb offset:30
rear:18x8.5- 5x114.3 18.6 lb offset:33

I did a small calc and it doesn't seem to fit the nsx. Has anyone tried this? They seem pretty light for 18".

 

[NSXDreamer2]

i had a 17*8 with 35 offset, it's flush with the fender. Even after I lower it, if you see from the front, the tires are kind of exposed. the 30 offset may be too much.

The 8.5 with a 33 offset might work at the back. but the front to rear rims width difference seems to be too small. Check on the FAQ http://www.nsxprime.com/FAQ/TireWheel/wheeltech.htm

 

[nsxtasy]

I doubt that they have the different center bores front vs rear that the NSX requires...

 

[RP-Motorsports]

offsets are 5mm too low in front. Rears would work, but you would have to run a 255 tire.

As ken states, you would need custom hub rings made. But with the fronts, only a 205 tire would work, and on a 8" rim, that is waaaaaay stretched.

I would NOT reccomend these. Get real Ray's wheels to fit. (Volk, Gramlights, G-games)

Most popular, I reccomend a 17x8.0 +35mm to +40mm and a 18x10.0 +38mm to +42mm
215-40-17 front and 265-35-18 rear.

many other configs are avail too, 15/16 16/16 16/17 17/17 17/18 18/18 18/19 18/20 and many different tire widths too.

 

[nsxtasy]

I reccomend a 17x8.0 +35mm to +40mm and a 18x10.0 +38mm to +42mm
215-40-17 front and 265-35-18 rear.

Those widths may be too wide, as they are at the upper end of the approved range and would make the tires look stretched. I would go 17x7.5 front and 18x9.5 rear.