Well... the passenger window dropped like a rock into the door. You know what that means...
I need some help from someone who has removed the passenger side window regulator before. Here's where I am at and I'm not sure the next step to take.
I have the door taken apart as shown below on picture 1.
I can get "almost" the entire regulator assembly out at this point. Except there is something that is connecting the regulator assy to the window down in the door as shown on picture 3. I "think" this would be easy to do if the window were raised up but I have no way to raise the window at this point.
My question is: Do I need to take the entire glass piece out to get the regulator out? This pretty much means I have to almost completely disassemble the door.
My next steps are to:
1. Finish removing the regulator and send it to Mirror Guard Co. for the $55 fix.
2. Install the "fix-it thingie" for the passenger side when I replace the regulator assy.
I need some help from someone who has removed the passenger side window regulator before. Here's where I am at and I'm not sure the next step to take.
I have the door taken apart as shown below on picture 1.
I can get "almost" the entire regulator assembly out at this point. Except there is something that is connecting the regulator assy to the window down in the door as shown on picture 3. I "think" this would be easy to do if the window were raised up but I have no way to raise the window at this point.
My question is: Do I need to take the entire glass piece out to get the regulator out? This pretty much means I have to almost completely disassemble the door.
My next steps are to:
1. Finish removing the regulator and send it to Mirror Guard Co. for the $55 fix.
2. Install the "fix-it thingie" for the passenger side when I replace the regulator assy.