• ***AVOID MARKETPLACE SCAMS!!***

    Scammers are using compromised Prime member accounts to pose as a trusted seller in the marketplace. Before you enter into a deal with any seller, follow these tips to keep yourself safe. If you encounter one of these scammers, please report them immediately and we will lock their account.

    Caveat Emptor!

Work Roar Rezax Lightweight Forged 17/17's

Joined
27 November 2005
Messages
6,030
Location
SoCal ✈ Vegas
For sale is a set of Work Rezax Roar 17/17's, these are one of the original forged lightweight wheel designs, and were intended as a competitor to the Volk TE37, weight is very close between the two designs, these wheels are 16.5lbs up front, and 18lbs in the rear, so several pounds lighter than the OEM wheels, and dramatically lighter than other aftermarket options.

This set is from a car in Japan, used for a few weeks on my second nsx, they're 17/17 sizes, and have essentially new tires (95% measured tread in the front, 90% measured in the rear, approx 1000 miles total).

Wheels are 17x8 +35 front, and 17x9 +38, the fronts are flush, the rears are flush with the included 10mm rear spacer. The rear spacer was custom machined to be hubcentric to the rear of an nsx, and the inner hub diameter of the work wheel, so no hubcentric rings are required, also included is a set (10 pcs) of ARP longer rear studs, for use with the spacers.

Tires are OEM 2002+ sizes, so 215/40/17 in the front, and 255/40/17 in the back.

Sold ($1000 picked up), local buyers preferred. These are very rare, very light, and look great - the rear, as you can see in the photo, is concave, the wheels were removed from the car today, and are in my garage.

1991.jpg
 
Last edited:
Back
Top