Are the Type R front sway bars supposed to touch the spare tire holder plate on a NA2?
The photo below shows looking down into the "frunk." The sway bar is touching on both sides of the plate.
![20230714_183843.jpg 20230714_183843.jpg](https://www.nsxprime.com/data/attachments/132/132392-59aa2b071f867304953395d15385cfcb.jpg)
The photos below show where one of the bushings attaches to. Was I supposed to install the metal spacer in between the bushings and the car? It looks like if I remove the spacer, it would make the sway bar sit higher, possibly removing the rubbing issue.
![20230714_183903.jpg 20230714_183903.jpg](https://www.nsxprime.com/data/attachments/132/132393-34c7cf679d9085c42e0d1725039152f4.jpg)
The photo below shows looking down into the "frunk." The sway bar is touching on both sides of the plate.
![20230714_183843.jpg 20230714_183843.jpg](https://www.nsxprime.com/data/attachments/132/132392-59aa2b071f867304953395d15385cfcb.jpg)
The photos below show where one of the bushings attaches to. Was I supposed to install the metal spacer in between the bushings and the car? It looks like if I remove the spacer, it would make the sway bar sit higher, possibly removing the rubbing issue.
![20230714_183903.jpg 20230714_183903.jpg](https://www.nsxprime.com/data/attachments/132/132393-34c7cf679d9085c42e0d1725039152f4.jpg)