EDIT: It has come to my attention that some people have come across other listings that my friend has made as well. He is doing the engine swap project with me and I have asked him to list this stuff on Facebook Marketplace as well as other sites because I hate dealing with FB. So no, he isn't trying to scam anyone, just helping get this stuff sold. I apologize for the confusion and should have said this at the outset. Thanks for all the interest!
EDIT 2: Took a closer look at the exhaust and it's NOT the TaiTec exhaust. Not sure which unit it actually is as it lacks badging of any kind. I have a separate thread started to see if anyone can identify it.
EDIT 3: Lowering asking price of both the engine and the transmission.
Located in Seattle.
ENGINE AND TRANSMISSION HAVE DONE 159,815 MILES TOGETHER.
I've decided to invite the pitchforks and zealous hatred of the forum upon myself --- I'm engine swapping my 1991! The original powertrain is seeking a new home:
ENGINE - ASKING $9,500
Engine is on my DIY cradle where I've given it a refresh:
- New OEM timing belt
- New OEM water pump
- New OEM crankshaft pulley
- New OEM timing cover
- New OEM seals (replaced nearly every single seal)
- New OEM valve cover gaskets
- SOS cam shaft plugs
- SOS lost motion assemblies
- SOS complete OEM coolant hose kit refresh
- Valve covers refinished by SOS
- CRF crankshaft pulley shield
- Valve adjustment
- Will include new OEM oil pan gasket
- Includes spark plugs, injectors, fuel rail, manifold cover, etc.
- Not sure which flywheel is currently installed...
TRANSMISSION - ASKING $5,000
- Not in snap ring failure range (attached photo of serial# J4A4-1001888)
- 5-speed
- JDM short gear set (previous owner didn't have records of install, so I can only say it was installed less than 159,815 miles ago lol)
- Retains stock final drive (good balance of quicker acceleration and good highway cruising RPMs)
-Comptech competition Sachs clutch disc + pressure plate (not sure which one, again no records from previous owner, judging by pedal weight probably what most would consider Stage 2 or 3; lots of holding power)
- Will include clutch slave cylinder
IF PURCHASED TOGETHER, ASKING PRICE IS $14,000 ($500 discount) AND I WILL SPLIT THE SHIPPING 50/50 WITH BUYER.
IF PURCHASED SEPARATELY, BUYER PAYS FOR SHIPPING.
I'll likely be adding a few other items as the project progresses (TaiTec cat-back exhaust, stock catalytic converters, stock headers, engine/trans mounts, ECU, wiring harnesses, etc.) so if you have a need for stuff related to the powertrain feel free to message me.
EDIT 2: Took a closer look at the exhaust and it's NOT the TaiTec exhaust. Not sure which unit it actually is as it lacks badging of any kind. I have a separate thread started to see if anyone can identify it.
EDIT 3: Lowering asking price of both the engine and the transmission.
Located in Seattle.
ENGINE AND TRANSMISSION HAVE DONE 159,815 MILES TOGETHER.
I've decided to invite the pitchforks and zealous hatred of the forum upon myself --- I'm engine swapping my 1991! The original powertrain is seeking a new home:
ENGINE - ASKING $9,500
Engine is on my DIY cradle where I've given it a refresh:
- New OEM timing belt
- New OEM water pump
- New OEM crankshaft pulley
- New OEM timing cover
- New OEM seals (replaced nearly every single seal)
- New OEM valve cover gaskets
- SOS cam shaft plugs
- SOS lost motion assemblies
- SOS complete OEM coolant hose kit refresh
- Valve covers refinished by SOS
- CRF crankshaft pulley shield
- Valve adjustment
- Will include new OEM oil pan gasket
- Includes spark plugs, injectors, fuel rail, manifold cover, etc.
- Not sure which flywheel is currently installed...
TRANSMISSION - ASKING $5,000
- Not in snap ring failure range (attached photo of serial# J4A4-1001888)
- 5-speed
- JDM short gear set (previous owner didn't have records of install, so I can only say it was installed less than 159,815 miles ago lol)
- Retains stock final drive (good balance of quicker acceleration and good highway cruising RPMs)
-
- Will include clutch slave cylinder
IF PURCHASED TOGETHER, ASKING PRICE IS $14,000 ($500 discount) AND I WILL SPLIT THE SHIPPING 50/50 WITH BUYER.
IF PURCHASED SEPARATELY, BUYER PAYS FOR SHIPPING.
I'll likely be adding a few other items as the project progresses (
Attachments
-
PXL_20240211_184209629.RAW-01.COVER.jpg336.9 KB · Views: 87
-
PXL_20240211_202241954.RAW-01.COVER.jpg246.9 KB · Views: 76
-
PXL_20240211_202211011.RAW-01.COVER.jpg131 KB · Views: 60
-
PXL_20240211_202200364.RAW-01.COVER.jpg208.4 KB · Views: 60
-
PXL_20240211_202139003.RAW-01.COVER.jpg328 KB · Views: 60
-
PXL_20240211_202113049.RAW-01.COVER.jpg126.3 KB · Views: 59
-
PXL_20240211_195545023.RAW-01.COVER.jpg323.1 KB · Views: 69
-
PXL_20240211_195340156.RAW-01.COVER.jpg206.7 KB · Views: 71
-
PXL_20240211_194640366.RAW-01.COVER.jpg278.4 KB · Views: 72
-
PXL_20240211_194628018.RAW-01.COVER.jpg220 KB · Views: 68
-
PXL_20240211_184326020.RAW-01.COVER.jpg215 KB · Views: 65
-
PXL_20240211_184302621.RAW-01.COVER.jpg217.4 KB · Views: 71
-
PXL_20240211_184247596.RAW-01.COVER.jpg320.7 KB · Views: 71
-
PXL_20240211_184235036.RAW-01.COVER.jpg179.9 KB · Views: 72
-
PXL_20240214_001615312.RAW-01.COVER.jpg135.9 KB · Views: 66
Last edited: