Teflon Fuel Hose and Fittings

[Mac Attack]

Up for sale is a continuous 13', 3" continuous section of 6AN Goodridge 910 fuel hose. I also have a 30" strand that's included but not pictured.

This is black kevlar aramid braid, super lightweight, with a smooth-bore anti-static PTFE liner that is resistant to nitromethane, E85, alcohol, and of course, gasoline. Use this and there will be no smell in your garage and you'll never have to replace it due to degradation, unlike most other inferior non-PTFE hose. The kevlar braid is awesome - If it rubs on anything it won't scratch it unlike steel-braided stuff.

Has an operating pressure over 1100 psi, and a tight 0.8" minimum bend radius. Best of all, you can DIY make your own hose with 811 series reuseable fittings. Instructions here:
https://www.pegasusautoracing.com/document.asp?DocID=TECH00026


I also have three 90 degree 6AN fittings for this hose.

Pegasus racing sells the 6AN hose for about $20 per foot here:
https://www.pegasusautoracing.com/productselection.asp?Product=3490


Pegasus sells the 6AN 90 degree fittings for about $25 per fitting here:
https://www.pegasusautoracing.com/productselection.asp?Product=3481


Everything is brand-new, never used. Buy it all for $285 shipped to your door in the continental US!

View attachment 150962

 

[Mac Attack]

Bump.

At some point all of these old NSX fuel lines are going to rupture spraying fuel at 50 psi onto your engine. Look at the prices for new OEM fuel lines. Better to retrofit in updated teflon technology that all OEM manufacturers now use....

 

[Mac Attack]

Bump.

 

[Mac Attack]

~$425 worth of stuff for only $275 shipped to your door in the continental US!

 

[Mac Attack]

I sold 5 feet of the hose, so there is a continuous 8' section plus a 2.5' section left. Also have the three 90 degree fittings.

$200 shipped in the continental US!

 

[Mac Attack]

Please close thread. The fittings have been sold and I'm going to keep the remaining hose.

Thanks!