• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Official Firearms Thread

davidf said:
How do you like your CCS stock? I assume it's made for the Colt 9mm carbine as well.
Click to expand...

The CCS uses a modified bolt carrier, so I don't know if it would work with 9mm. Does the 9mm use the same bolt carrier and spring as the .223? If so, it should work.

The stock does have a shorter length of pull, and it isn't the most comfortable to shoot, but it is pretty cool and it makes the gun shorter when collapsed.
 
Thanks. I just googled it. Does'nt look good for me:frown:. 9mm is not gas operated so bolt assm. is all 1 piece. Maybe down the road hopefully. Looks very neat though.
Olyar15 said:
The CCS uses a modified bolt carrier, so I don't know if it would work with 9mm. Does the 9mm use the same bolt carrier and spring as the .223? If so, it should work.

The stock does have a shorter length of pull, and it isn't the most comfortable to shoot, but it is pretty cool and it makes the gun shorter when collapsed.
Click to expand...
 
Here's the one I plan to turn into an SBR. It is a 10.5" 5.56 and is surprisingly tame for how short the barrel is.

IMG_5026_zpsb3b9e351.jpg
 
spider2k said:
i got my spaaarowwwww!!!

just sent my lancer lower to the engravgers to get started on my next stamp:)
Click to expand...

Sweet. I'm in the process of moving so I don't want to submit my form1 until after that is done. This will be my first.
 
I want this

Man, I have no use for this, but I really, really want this.

14952542721_6d2b8bb8ba_b.jpg

14769038148_e0103bb57c_b.jpg


Pump action 12ga shotty with 11.6" barrel, 6 round magazine, collapsible stock (29" collapsed), full length picatinny rail. $700CDN and non-restricted here. Gotta say, I'm really tempted.
 
Last edited:
Prices for firearms and ammunition in the Kurdish city of Sulaymaniyah:

AKs - $600
M-16s - $2700
M-4s - $6000
7.62x39 - 75 cents
5.56 - 50 cents

These prices are a tad low compared to other parts of the country.

In Kirkuk:

Glock 19: $2500
Tariq: $1200
AKs: $700
M-16s: $3000
M-4s: $9000
AKMS: $2000
PKM: $5000
RPG: $200

Guess we don't have it too bad.
 
sca037 said:
So, what's it like using the Sig brace?

Brian
Click to expand...

On the shoulder I'm sure it works fine, it atleast feels comfortable...enough, but I took mine off immediatly.
hadn't fired it yet.
The brace and those straps are far from easy on the eyes for me.

1st time at range with P516 and zeroing 12guage Saiga:
<iframe width="640" height="360" src="//www.youtube.com/embed/ye58lUEbT2w?list=UUkPMZcBE4yt_-ER6MM34ZtQ" frameborder="0" allowfullscreen=""></iframe>
 
Last edited:
Gun Porn

This my FNH A1 Special Police Rifle an AAC 762-SDN-6 silencer shooting Corbon subsonic .308 rounds. The scope is a Sightron SIIISS 10-50x60 LRIRMOA.

At 100 feet the bullets dropped an amazing 20 MOA from the supersonic zero. Will give them a go at 50 feet next. This was recorded at the Palm Beach County Sheriff's Office Firearm Training Facility.

<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/xCCVTA7gB14?hl=en_US&version=3&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/xCCVTA7gB14?hl=en_US&version=3&rel=0" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>


Here's the AAC 762-SDN-6 silencer on one of my AR-15s shooting subsonic .300 Blackout rounds.

<object width="560" height="315"><param name="movie" value="//www.youtube.com/v/W-_TvSvawuY?version=3&hl=en_US&rel=0"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="//www.youtube.com/v/W-_TvSvawuY?version=3&hl=en_US&rel=0" type="application/x-shockwave-flash" width="560" height="315" allowscriptaccess="always" allowfullscreen="true"></embed></object>
 
chudson1549 said:
I love mine. yours is setup like mine but I also have a flashlight side mounted
Click to expand...
Flashlight and green laser combo is the next modification I will do. But this time of year I'm normally doing NSX mods so guns take a back seat. & yes, I enjoy mine very much as well.
 
Well I finally got the tax stamp back on this one and here it is. I had the laser engraver guy add the skull for me while he was doing the other engraving. I can't wait to try it with a stock for the first time..
91B79A0C-1456-4648-ACF3-99930F965C03_zpsindpn28a.jpg
 
Got ammo? bulkammo.com is having a special 500rd 5.56 55g for 200 and some change.

they also have 1000 green tip 5.56 for 600

just saying
 
Finished up, well sorta, the .22 for my 13 year old daughter. Still have to properly align and lap the scope rings. Base, rings, and scope are all Leupold (dang, they make good stuff).

Ruger 1022 Stainless1.jpg
 
My last SBR eForm summited 1/25/2015 went approved 3/12/2015 (47 days) what are you seeing???
 
just finished my 2 80%'s I got, the joy of building your own rifle was like giving birth
 
Last edited:
Back
Top