Recent content by docofmind

I would like to apologize on behalf of SWR for the missing brake fluid in the kit. As you know, SEMA is around the corner and has basically put everything else on hold until the show is finished. Unfortunately, as anyone who is in the industry knows, everyone waits till the last minute...

6 piston Billet Wilwood caliper 12.2" 2 piece Directionally Vaned Slotted and Cryogenically Frozen Less than 5k miles on the kit, Pads are like new. Perfectley balanced to work with the stock master and maintain proper balance and bias without the use of proportioning valves. Perfect for...

Did anyone happen to catch the type of dyno used?

If you wanted detailed technical info, give me a call anytime and I ll give you whatever information it is you need. Suffice to say that the over all piston diameters of the 4 piston rear caliper is not much different than the over all piston diameter of the OEM caliper. The difference...

Very nice choice. Light weight with great offsets. Your wheels will clear the brakes with room to spare. Im positive ;) Give Mike a buzz and get the info on all the different variations.

What are the sizes and offsets of your wheels? :)

The GT3s actually arent that bad. What are the offsets on your wheels? Is that doesnt work, go here... GT3 + 6 piston

Another topic that comes up quite frequently. Just as in bigger is not always better, more is not always better either. The number of pistons does not always equate to better braking. What does matter however is the diamater of these pistons. This is what determines the amount of...

I totally understand your situation and your request, but i would also like you to understand mine. I dont build anything for "show" value. Everything kit that I put together has been done so with one objective in mind, performance at a reasonable cost. Aesthetics have always been...

As Craig mentioned, Wilwood offers a complete range of brake pads manufactured by Raybestos. They offer everything from a completely dust/noise free ceramic street pad to an all out endurance ready race pad. This brings up another great point regarding Wilwood components. Replacement parts...

Its impossible to give you a fixed time frame on something like this because the answer is completely dependant on each specific application. For what it is worth, I ran a set on a Miata for 3 years without needing a single rebuild. The car saw atleast 8 track days each of those three years...

Craig, thank you so much for posting the pics. Thats the first time i have seen the rear fully assembled :) I cant believe its taken so long, but with both of our busy schedules we could only take baby steps in finishing this. Thankfully, it paid off. Looks like everything fits like a...

Thank for the kind words Craig, and the rest of you. It really is my pleasure. There is nothing more rewarding than working with a group of people who appreciate your efforts. Thats what makes it all worthwhile for me. Larry, the master is the same for all years. They started with 2...

Larry, the rear piston size from 97+ is 48mm. From 91-96 it was 43mm for the rear caliper. On the front, 91-96 the smaller piston is 36mm and the larger is 40mm.

Note the ugle tire ;)