Search results

Freshly built Toda Racing/RFY short engine for sale!! Here we have my unused Toda and RFY Built engine (bottom end). All parts were sent to Toda where they cleaned, inspected and machined (bored, honed and decked) the block. They are so precise they measure the alignment of the journals and...

From my project car part out. Pair of Comptech later Carb EO headers with test pipes. Will mate up to any standard (early type) exhaust/muffler In very good condition with no dings or dents etc.. $1200 shipped from UK

Cedar Ridge Rear sway bar end links, Non compliance clamps, SoS Toe Links & Rear beam From my unfinished track project Im parting out. Items less than 200 dry miles old unless specified Cedar Ridge Rear sway bar end links, $150 shipped (from UK)...

I have for sale my AEM Infinity 8 from my unfinished Track project that Im parting out. I bought it from SoS with their PnP harness. It comes with everything as when new, but it used so the ancillary plugs have been pinned but I can supply the plugs with tails. Was fitted to my car for about...

Set of KW Clubsport coilovers from my track car project Im parting out. Probably done 200 dry miles so like new. These are a setup up from the V3s $2450 plus shipping from the UK (approx $120) $3500 new

SOLD From my track car project. Complete AP BBK (front, rear and parking brake) $3500 plus shipping from the UK - approx $150 with UPS This is the AP Formula kit (all factory AP) for the NSX comprising ($8000 new) 6 pot AP fronts (CP5555) 38mm, 32mm, 28mm pistons) 4 pot AP rears (CP7622...

SOLD For sale is a nearly new RFY Carbon intake - details here http://www.rf-yamamoto.com/NSXengine/19.html Fitted to my project track car. I had a trim a small piece off the black (non CF) piece to clear my roll cage but I have supplied a brand new upper carbon piece so you wont see this...

Change of plans means my BNIB! Fresh Science of Speed rebuilt C30 engine is for sale. Still in the crate in which it was delivered so zero miles. Basically had their full NA rebuild service with everything overhauled plus some extras. Cost of just the rebuild was $8600 plus obviously I had to...

Im parting out a complete C32 engine - engine no. C32B1-3130064. I bought the engine as a 20k mile engine from a salvage/fire damaged car. It had been in storage for some time and some water had got into one of the bores. Unfortunately it looks like the corrosion has pitted the FRM liner and too...

Set of Tein Super Street Coilovers in excellent condition 16 way damping adjustable $1100 shipped to mainland US from UK via UPS Express

WTB - I need a front bank cylinder head complete with cams. In good condition with no scoring on the journals. Could be bare but still need the cams. Thanks Mike

I bought a tired, but complete C30 engine and sent it to SoS for a rebuild. They stripped it down and one single head and single cam has scoring so needs replacing. Crank, rods, block etc. are all good for rebuild. NOTE - it is just the FRONT bank cylinder head and INTAKE camshaft that needs...

Any NA cams considered

RFY (Racing Factory Yamamoto) GT Exhaust Version 1 with single tipsPretty much as new condition. Fitted to car and started but never seen the road.Comes with the noise restrictor. But unfortunately as its for my race car its too loud for some of the tracks I need to visit 95db)$2300 shipped to...

Ok folks, Im in the UK and want to use the ECU used by my tuner - OBR EFI Euro 4 - its a C30 on ITBs There are no available base maps for this ECU so working from scratch Ideally Id like a base map from something like an AEM V2 and we can pinch the sensor/coil and injector calibrations from...

Genuine OEM 02+ Type R Rear Diffuser - pretty much mint condition. Direct fit to 02+Rear valence (also for sale) $1000 shipped (from UK - via UPS - tracked, 2/3 day delivery).

AS new OS Giken Superlock LSD & 4.4 Final Drive for 5 Speed Trans. Fitted for approx 1000 miles. Like new. Removing to put gearbox back to standard. No marks, perfect working order. Based in UK but shipping to US with UPS Approx $130 - specs - 25/38-336-12-10S $2500 firm Pics:

Selling my widebody kit so these are goingSet of brand new Rota GTR-D in silver with polished lip 18x12 ET0 and 18x9.5 ET12Set of brand new Michelin Pilot Sport PS2 315/30/18 on rearSet of excellent Michelin Pilot Sport 265/35/18 with 6mm tread (one is a PS2 and one is the previous PS...

Complete change of direction means I am selling my FX-TA1 kit I bought from FXMD a couple of years back. We had started fitting it, and making it fit nice with new mouldings on sills for a better look and also metal brackets to make the side skirts fit much better than the original design. The...

Nitron 2 way Coilovers/Racing Shocks Well as no one seems to want to buy my KW Clubsports, Im very reluctantly having to sell my Nitron Coilovers. I thought these were R3s but turns out they were a custom made set for a customer - two way adjustable coilovers. Basically same as R3s but with 2...

For sale is my Comptech built VTEC killer race engine I bought from Ken at FXMD a couple of years back. Change of plans means Im selling. Never fitted it just stayed wrapped in plastic and sealed. Im in the UK but can ship freight no problem. May split if there is interest in bottom end or the...

Brand new and unused but not boxed. I test fitted them to my race car project but have since got myself some Nitrons. So they are new, unused and come with everything as when new (locking nuts and tool kit) $3100 shipped to Continental US with UPS Express (2-3 day delivery) Im a Honda...

Bit of a technical one here but does anyone know the CC of a stock OEM C30 piston (that is the piston, not the combusion chamber) I'm trying to calculate the CR of a high comp engine I have but need some base data to work from. Thanks Mike

Swapping out my Comptech VTEC killer setup so need standard set of followers and cams. Can swap if anyone interested Need to ship to UK (but I can arrange shipping) Cheers Mike

Brand new 5 speed transmission - New CT 4.55 FD, New NA2 LSD, New USDM gears etc.. all gears have been WPC heat treated as well. Bought from Ken at FXMD who also supplied me an engine and widebody kit. Only selling as decided to go with a sequential box. Im a Honda Tuner in the UK...