Search results

I don't use bluetooth. I prefer cable. You can add on to usb3 for a bluetooth connection, or they sell another that is bluetooth. USB 3 gives charging and streaming via cable.

I just installed the USB3.... I did a quick test with it, and it worked great with my iPhone 15 pro. It was a little trickier to mount as the box is slightly larger, and the usb connectore that comes out of it is long and fragile for the tight confines it has to fit in. I was able to mount it...

Grom responded with this: "The product may need to be replaced with the USB3 which is what is currently sold for USB integration and I have not seen any issues with USB streaming with Iphone. The USB3 has a USB type A and you may need to purchase a type A to type C cable since the Iphones are...

It sounds like I may just need to get one of their newer units. I looked and they actually make 3 for the NSX; the BT3, USB3, and a simpler version for about $80. I like the chargining function when plugged in, so I'm probably ok without the bluetooth. I'll wait to hear back from Grom to see...

I've got an older Grom integration unit, that I bought around 2017 that has the 30 pin cable end. I've run a 30 pin to apple lightning in the past and it's always worked fine. I recently went to iphone 15 pro, with the usb c connector, and I haven't been able to make it work. It says "device...

Thanks! It is hard to keep up with NSX filters and all their different part numbers over the years. David

I know the oem oil filter number changed from the tall to the shorter filter, with part # 15400-PL2-505. I ordered a few online showing that part # from OEMAcuraParts.com, and it is what is listed in their parts diagrams, but was sent part # 15400-PL2-306. Is this the current part #...

Thanks for that update on nsx shop. I've always had good experiences when I've ordered from them. Just as an FYI, I placed an order with OEMAcuraParts, and there were a few things on national backorder with unknown times in stock. They were 2 of the engine mounts, and the outboard axle nuts.

I looked up speedy parts and austrian type r, but couldn't find websites. I've ordered from the nsx shop in the past, but they don't seem to be open anymore. My concern with braided stainless hoses is of no being abe to see the condition of the rubber underneath; bulges, splits, etc. Atleast...

I tried to order factory brake hoses today, and found them to be discontinued. I've always been hesitant to use braided stainless hoses, and I'm a little uncomfortable using aftermarket rubber hoses as well. What are the best options? Are there any OEM hoses available? I'm also getting ready...

I bought a set of the SOS Sway bars from 2 years ago. I looked on their site to see what diameter they are, but they don't seem to carry them anymore. Are they the same as the old comptech sway bars? I bought them thinking I would go with the KW's, but never got to that step. On the type S...

The type S route is interesting to me..... What would you say the stiffness and harshness are compared to stock? Are they non adjustable shocks? What is the ride height compared to stock? I am not looking for a slammed look at all, but rather something slightly lower than stock, but fully...

I got to drive an nsx with supercharger and short gears (stock final drive) and I really liked the closer ratios. I don't have any experience with short gears and type R final drive, but I have driven a good friend's non-supercharged car with 6 speed and 4.23, and liked that. From the wiki, it...

I'm fully committed on my nsx project now. I have a '91, and am installing sos supercharger, jdm short gears, type r final drive, sos 350 sport clutch (a little on the fence on this, as my friend's chatters.... Might leave my 35k mile stock clutch in and see how it does....), headers, new...

Has anyone had any recent order history with the company? I place an order June 13, and haven't heard or seen anything from them. I've emailed and pm'd them as well.....

I got to drive my friends car with the removable cushion. I had a 1" bottom cushion from a recaro race seat i put down, and it worked well creating all the room I needed. The seat narrows as you go down though, and it pinched my hips. That part was uncomfortable. Gallardo seats with the...

I have a covercraft Noah that I use when I drive mine to work. It fits and works very well.

Thanks for the suggestions. I'll try taking the foam out, and try some different thicknesses to get it comfortable.

I would use Nabil at First Class Automotive. He's been honest and skillful helping on my NSX.

I tried a friend's once who had his seat cushion loose, with just a towel in the bottom. It helped a lot, but the narrowing of the side bolsters pinched sitting that low. I'll try his again with a cushion in between stock and nothing. What's the best way to trim the foam evenly from the seat...

I'm tall (6'4"), and I struggle with the seating position in my car. I'd love to get a little more extension of my steering wheel. Even with the wheel fully extended, my hand catches my knee in tight turns. I've thought about going the non airbag R route, but I really want to keep my stock...

I wonder if it would be worth trying the fluid change to GM in my '91. It occasionally has difficulty coming out of gear on downshifts. It seems to happen on several gears. I could pull harder and it would come out, but I give a slight tug, release, and then pull again and it comes out...

I normally use safari too; but I have chrome as well. I'll try the Hotlink Fix. Thanks! David

Thanks guys for all the input! The original transmission in my car was replaced under warranty for snap ring about 30k miles ago in '01, and the clutch was replaced then too. The slave and master cylinder were replaced at 56k miles in '13. A clutch hose went leaked and was replaced/bled in...

I'm sorting out my new to me nsx, and one thing I notice is on some downshifts, the lever does not freely want to leave the gear it's in. I've learned to pull slightly, breathe off, and then it pulls out of gear smoothly. It only happens on some downshifts. I had an old 993 once, and had this...