My 20 year old 16"/17" Speedline Mistral wheels have cracked, I'd like to stay with this size since my 3 Bridgestone tires have only 3K miles. Who makes 7.5mm x16, 8.5mm x17 35;114 wheels?
Although I haven't been too active on Prime ,many of you know me , one of the original owners of my 1993 NSX in little Rhode Island.
Well, finally retired, closed my podiatry practice a year earlier, (massive rotator cuff tear and surgery) in Feb 2014. It was almost 4 months before I was able...
Hello everyone!
Original owner of my 1993 NSX, finally leaving the cold winter and the garaged RI life for our condo in Scottsdale Ranch (Racquet Club ) in Sept and eventually buying a house in Trilogy at Vistancia in Peoria..
Can anyone recommend a secure, air-conditioned car storage from...
Today I ran my '93 NSX (90K mi) hard to burn off the 4 mons of winter inactivity. Like I've done for the past 18 years. Except THIS time I heard this loud tapping-clanging sound from the engine, passenger side.
New oil change, no leak, not running hot.
Comptech headers,exhaust cold air...
Sorry for the delay in uploading my photos, my website is down and upload time just too long for these large files. I sent my ofoto link to nsxprime03 and hope he's able to link this site to all. Had a great time and wished I was able to include the track days. Dennis
Need to know WHAT IS THE DIFFERENCE of Bridgestone tires RE010 vs RE040??
REALLY HATE GIVING UP ANY EXTRA SIDEWALL (215/45 VS 215/40 ON MY LOUSY POTHOLE ROADS,
IS TIRE TREAD SAME? COMPOUND? ANYONE?
My questions are:
1. Does the '93 TCS values differ from the 2002?
I'm going to try 215/40-16 + 255/40-17 Bridgestones on my '93.
Now the '93 TCS was ok for going 245/40-17 in rear, will it accept the 255/40-17 for rear as well as go 215/40-16 OR 215/45-16 for front?
2. Can i mix RE010...
I purchased my '93 NSX 10 years ago from this dealership. At the time ,service was great , but it has recently changed hands.
Let me post my experience with "Jason" the service manager.
I brought my NSX over (scheduled appt.) to have 4 rubber bushings,gaskets etc replaced on the 4...
I will reply privately about my experiences with this place. After having my NSX for 10 years, I've seen many managers, but this one takes the cake!. Actually avoiding looking at car, probably because they don't have competent NSX mechanics. Guess I'm traveling out of Rhode Island for servicing...
I've replaced my shocks w/ Bilsteins (stock springs) Now definitely shocks are for NSX but here's my problem..
Dealer says that the aftermarket installer didn't use a rubber damper on the top of the shock and he doesn't know the number to order them (no # in manual) and that's why the car makes...
I'm in need of changing my tires again |
'93 NSX using;
Speedline Mistral Wheels
16x 7.5 35mm offset FRONT
17x 8.5 38mm offset REAR
I've used Standard Yoko A022 215+245's. My problem is here in how hard these tires get, I can't believe that after 10+ yrs of tire development, there isn't a...
I wanted to just see how many nsxers drive daily without their spare tire and jack?
After 9 years and 58K miles,I've only used it once, it goes add some weight..
If I pick up a nail, I can always use the flat filling stuff, I don't plan on repairing the stock yokos.Right?
Dennis
I don't exactly remember the stock height, but my NSX is now 24.5"-front/26"-rear after changing to Bilstein HD shocks w/ stock springs.
Is the rear end supposed to be 1.5" heigher with the lower perch settings on all 4 shocks?
Was the upper perch not bolted down enough?
Is this right...
I've had my '93 NSX for almost 9 yrs, 58K miles, do about 1-2 (or try )controlled autocross events/yr. Need to get new pads and I would assume rotors,since this is only 2nd set of pads replaced.
(please don't laugh..)
1. Why do some people just change front rotors (different brand)?, leaving...
I had someone install Bilstein HD #1663,#1665 rear on my '93 NSX. I told him to use the lwering perch. I expected to see the car 7/8" lower but to my shock it now is over 1" higher!! What happened?
Seems like straight forward install, did he not tighten dampering nut? I tought you just put it on...
I removed my RM sway bars yrs ago and wish to re-install them along with Bilstein HD shocks/stock springs on my'93 NSX. My questions are:
1. I understand the reasoning for sway bars on the track, but in the "non-perfect" world of street use, (especially in Rhode Island), isn't their use going to...
Wanted to know after the fact, my Speedline mistal 16/17" wheels/yoko tire combo weigh out +8fr/rear +10lbs over stock.
Besides changing wheels (just spent$$ on my S4Avant,and had the Speedlines resurfaced)
what else can I do withthe suspension to offset the "heavier feeling"? I know the yokos...
I took off my RM sway bar for about 2 yrs (hey, I thought it gave me a hard ride at the time!) but now I'm looking to get it on my NSX again. I heard someone say that they're "adjustable". My Neuspeed sway bar on my S4Avant has 2 different holes on each side for solft/firm setting but the RM...
I've ordered the hd Bilstein shocks for my '93 NSX. I'm not interested in going coilovers,few track meets and the RM sway bars tighten up enough.
Wanted to know if anyone has used Bilstein shocks only, HD I guess is only avail. Might drop a bit with a lower perch setting but really want to...
I recently blew both my subwoofer as well as the speaker just behind the center console wall (not sure of type). I'm assuming Acura will charge and arm/leg to repair (read the "self-repair" article, forget it)
Wanted to know if anyone has installed new speakers/amp, and kept their stereo/cd...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.