Search results

FS: This is the Aux. engine cooling fan that came off my 92 NSX. It is in pefect working condition. Asking $20 plus shipping, Paypal accepted

For sale: This is the OEM gas filler assembly that I removed when installing a wide body with race filler on my 92 NSX. All pieces included. Asking $15 plus shipping, Paypal accepted Thanks

FS: These are the driver and passenger side seat belt assemblies I took off my 92 NSX when I did seat/harnesses/harness bar installation. All are in good working condition. Asking $30 plus shipping, Paypal accepted Contact me with any questions, thanks!

FS: This is the rear brace of my 92 NSX, it is in good condition and does not have any visiable scratches, dents, etc. Asking $20 plus shipping, Paypal accepted Thanks!

For sale: This is the OEM power antenna that I took off my 92 NSX when I did a widebody with a shaved ant. hole. It is in perfect working condition. Asking $25 plus shipping, Paypal accepted Email me with any questions

FS: These are the OEM side vents that came off my old 92 Berlina Black NSX, I removed them to make molds of them for CF vents. They have been in a box ever since. They still have some mold release wax on them and are a little dirty but with some time put into them I am sure they can clean up...

For sale: OEM Valve springs and retainers from a 3.0L NSX, these were leftover from when I built the top end of my motor for cams. $20 plus shipping, Paypal accepted email me with any questions -thanks!

For Sale: OEM NSX toe links, used, removed at around 60k when I did NC links. $15 plus shipping, Paypal accepted -Thanks!

FS: The OEM aluminum spare tire bracket that goes under the hood... Removed a looong time ago when I did a vented hood, been in a box ever since. $15 plus shipping, Paypal OK Email me with any questions -Thanks!

FS: ScienceofSpeed Rapid NSX-R shift knob, this is brand new and has never been installed. Not one swirl, scratch, etc. These come clear anodized for durability and clip into factory boots. More info here...

For sale: Original NSX Owners coffee table book, this is the all black one that was only given to orignal owners after purchasing an NSX. Size is 10.5x12. 64 Pages. I got this from the original owner of my old NSX who bought the car new in 1992, and it has been on display on a shelf ever...

For sale: Original collectors NSX coffee table book, given to new NSX owners and prospects. I got this one from the original owner of my old NSX, who got it when he bought the car brand new in 1992. So this book is 15 years old. It is a hardback 12" x 12" book, the one that is black and...

For Sale: NSX Factory Service Manual, 1992 version. This has been lightly used and is in good condition, probably some dirty finger prints on a few of the pages and a few smal blems on the covers...Pictures attached Asking $75 plus shipping and any paypal fees... Contact me with any...

FS: Blinder M20 Xtreme Laser Jammer kit, front and rear transceiver units, brand new/never installed. I got this for my car but never ended up taking the time to install it...I was happy with my Valentine since there are not many police with laser around here...plus I dont speed =) This is a...

FS: Takata Racing Harness Pads, 2 pairs, LIKE NEW, Memory foam and super soft ultrasuede like material. These are the nicest out there that I know of, and also the most expensive. Some info here: http://www.takataracingproducts.com/ I figured I would throw these up to any NSXers who need them...

FS: FRP Center Console, version with deleted Ashtray, cointray,& radio for custom installations. I have one of these left and will not have anymore for a while if ever. Primered white and ready to be trimmed for custom applications. Asking $95 Will be shipped insured and packaged excellent...

FOR Sale: This is a OEM rear bumper that came off my 92 Berlina Black NSX...IT was the one I used to mold for the carbon fiber one we made years back. it has been stored ever since. It still has molding wax on it in spots that will need to be cleaned off, and it has one scratch I know of that...

FS: 1 OEM NSX Intake system complete with filter,fittings, etc. Taken off a 92 NSX with around 50k miles..Excellent condition. $65 shipped to lower 48 states. Paypal/cashiers check/money order accepted. Thanks!

I have these 3 Fiberglass NSX center consoles avialable. They are stereo, ash tray, and coin tray deleted. Two of them have the climate control, shifter, and e-brake holes precut. The other is uncut/drilled. Any good body shop can do the prep and paint to match this to factory color. $125 for...

For Sale: One JDM NA2 NSX-R Intake Manifold Plate, Lightly installed for a while, not even one visable blemish of any kind, SAME as new. This is a nice JDM bling bling part..looks really good matched with the NA2 NSX-R Intake manifold cover as well. You NSX-R lovers will like this obviously...

Something else cleaned out of the shop... I have one radiator cooling panel, this is cut for a 02+ NSX but will fit on any year if you want it to. This was one of the first ones I ever made out of the mold so it had some aethetic issues (resin rich areas, air bubbles, etc.) but is 100%...

Cleaning out the shop shelves again.. I have 4 fiberglass/gelcoated, vacuum bagged, Center console replacements for sale. They are with the stereo, ashtray, and coin tray deleted. Perfect for custom stereo/video installs, just drop of at your local paint/body shop and they can sand and paint...

So as many of you already know, I have decided to sell my car =( but my loss can be someone elses gain, this is an awesome NSX... *PLEASE CLICK HERE FOR THE FOR SALE PAGE and all info and recent pics can be veiwed: http://www.sethrowan.com/nsxforsale.htm I am only going to have the NSX up for...

To the NSX Community: OK, I am going to try to make this as short as possible..even though it is an issue that has consumed my life for over a month now. It was hard enough for me to come to the decision that I need to sell my NSX that as many of you know I poured my whole heart and life...

For sale: New, never installed FRP center console with cutout for OEM ashtray. All holes are precut perfectly (except stereo area). Ready for the paintshop. Works with OEM aspirator fan. $250, buyer pays shipping. Paypal preferred Thanks!