EDIT: Buyer never picked up so I refunded his deposit and now back for sale. $1100 for everything.
I acquired these throughout the years in prep for an engine build I no longer have time for :frown:
Partial Long Block includes 5 stock pistons and 5 stock rods and stock crank shaft. Something in #2 cylinder let go but only caused damaged to the cylinder wall. Crank shaft appears to be in good shape. I have had it looked at by 2 professional NSX engine builders here in SoCal and this is a great candidate for getting sleeved. I have a 6th stock piston/rod setup to include if I can find it which I purchased separately some time ago. Pardon the surface rust as it's been sitting for years. This is a great candidate if you were going to sleeve your stock block anyway. Don't waste that stock block and buy this instead. (Crank alone would sell for ~$1500 since Honda discontinued)
Bare cylinder heads as shown in the pictures. What you see is what you get. The intake bowls on one head partially ported but had to pull them out of the shop before they could be completed. The porting are light and wasn't completed so these are good candidates for full head work. Again, if you're going thru this now... save some money and buy these instead of porting your stock heads.
Pickup only (91731). I can not crate for shipping but you can arrange pickup if you'd like.
Selling below market in hopes someone can make use of these for an epic motor build
I acquired these throughout the years in prep for an engine build I no longer have time for :frown:
Partial Long Block includes 5 stock pistons and 5 stock rods and stock crank shaft. Something in #2 cylinder let go but only caused damaged to the cylinder wall. Crank shaft appears to be in good shape. I have had it looked at by 2 professional NSX engine builders here in SoCal and this is a great candidate for getting sleeved. I have a 6th stock piston/rod setup to include if I can find it which I purchased separately some time ago. Pardon the surface rust as it's been sitting for years. This is a great candidate if you were going to sleeve your stock block anyway. Don't waste that stock block and buy this instead. (Crank alone would sell for ~$1500 since Honda discontinued)
Bare cylinder heads as shown in the pictures. What you see is what you get. The intake bowls on one head partially ported but had to pull them out of the shop before they could be completed. The porting are light and wasn't completed so these are good candidates for full head work. Again, if you're going thru this now... save some money and buy these instead of porting your stock heads.
Pickup only (91731). I can not crate for shipping but you can arrange pickup if you'd like.
Selling below market in hopes someone can make use of these for an epic motor build
Last edited:
