At what % does your Clutch Engage.? Close.

[khoazie]

Sorry im a new owner. i did use the "search thingy" nothing was found.

specs: white 96 3.0tt


my question is: At what % when you let out your clutch your car is engage in gear?

stepping alway down = 0%
mid point = 50%
let it completely out = 100%

reason why i ask is, my nsx clutch doesnt seem to engage until about 85% is let out. clutch does not slip from all gears.

What should i check. clutch fuild seem fine.

is this normal? cause previous cars clutch engage is around like 60%.

contact number is 6825580290 Tx.

 

[khoazie]

Re: At what % does your Clutch Engage.?

I failed. i just read some more post: oem cluth tend to grab very high.

 

[khoazie]

Im leave this post.. just incase new member have the same question. :tongue:

 

[shawn110975]

young grasshopper is learning.

when I got mine I noticed that to. it grabs pretty high.

or I think my clutch is worn and needs to be replaced.

but I can still dump the clutch and melt tires. with the TCS off lol

 

[Briank]

The free play in the petal is set by an adjustment of the push rod for the clutch master cylinder. Wear of the clutch does not change the engagement point. A clutch petal that is adjusted to factory specs will engage high.

 

[I_M_Legend]

Do you guys press the clutch pedal all the way down with each shift or do you press only far enough down to engage the next gear?

 

[neuronbob]

I always completely press the clutch pedal in when shifting. It’s habit from 30 years of driving manual cars. What you are describing will wear out the clutch.