BBSC or Turbo question

[01blacks4]

where do these systems tap into the block for oil lines? what oil pressure do they see? I am assuming they need to use a resticker of some sort, (or just smoke down the road)

do they tap in by the oil filter? use an oil cooler bung?

just curious
thanks
marc

 

[Briank]

Search is your friend :wink:

http://www.nsxprime.com/forums/showthread.php?t=43041&highlight=turbo+oil

 

[SNDSOUL]

Search is your friend :wink:

http://www.nsxprime.com/forums/showthread.php?t=43041&highlight=turbo+oil

Since he posted in that thread about three people into it, I am willing to bet he's already read that one.

Can anyone actually be of some help with the question?

 

[peiserg]

If you want to have a peek at my car, give me a call. hth.

 

[mikeh]

My blowers oil feed line is T'd off the oil filter base unit, at the pressure sensor port. You can view the shopmanual page for the oil filter/cooler assembly here:

http://www.blazen.com/mike/nsxmanual/page.php?page=161

The return line from the blower goes directly to the oil pan-- using gravity, no pump. If you do this ofcourse you have to be careful that the line doesn't have any dips.

I'm not sure the exact pressure, because I don't trust the oem gauge, but I'll know for sure in the next couple weeks when I install my own oil pressure/temp sensor/gauge. Cheers,

-mike

where do these systems tap into the block for oil lines? what oil pressure do they see? I am assuming they need to use a resticker of some sort, (or just smoke down the road)

do they tap in by the oil filter? use an oil cooler bung?

just curious
thanks
marc

 

[Turbo NSX]

Mine is t'd at the oil filter and there is a restrictor but the size is a secret.