I currently have a older Kenwood double DIN with a small amp in the boot and some components up front, the sound is ok but not great. struggle to even handle the mid ranges without distortion but i do recall a crossover failing and i replaced it from another from a different brand so wasn't matched for the speakers.
The Kenwood unit is probable about 10 years old, the speakers not far off.
If i was to purchase a state of the art double DIN with 4x50w built in could i run a pair of components with good sound quality and remove the amp in the boot? I would like to update my sound system while simplifiying it if possible.
Technology has moved on also.
I was looking at purchasing this double DIN: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-dmx8019dabs_p-41298.htm
With these speakers: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-kfc-xs1704_p-42276.htm
I also considered a small self contained sub amplifier for the passenger footwell, i know you can get the moulded ones but they don't make them for the RHD market so was looking at something like this: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-ksc-sw11_p-31239.htm
Something that will go in the same location, but does anyone have any experience installing one of these in to the NSX and how well do they fit?
I'm guessing you would make a board for it to mount to? Would you put it behind the carpet of over the top?
I might try it without the sub initially and add if i need to.
My current headunit has a old school Apple connector from a Gen 1, Apple device. Although my phone does play via Bluetooth but the quality isn't there.
Thanks
The Kenwood unit is probable about 10 years old, the speakers not far off.
If i was to purchase a state of the art double DIN with 4x50w built in could i run a pair of components with good sound quality and remove the amp in the boot? I would like to update my sound system while simplifiying it if possible.
Technology has moved on also.
I was looking at purchasing this double DIN: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-dmx8019dabs_p-41298.htm
With these speakers: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-kfc-xs1704_p-42276.htm
I also considered a small self contained sub amplifier for the passenger footwell, i know you can get the moulded ones but they don't make them for the RHD market so was looking at something like this: https://www.caraudiocentre.co.uk/product_m-kenwood-car-audio-ksc-sw11_p-31239.htm
Something that will go in the same location, but does anyone have any experience installing one of these in to the NSX and how well do they fit?
I'm guessing you would make a board for it to mount to? Would you put it behind the carpet of over the top?
I might try it without the sub initially and add if i need to.
My current headunit has a old school Apple connector from a Gen 1, Apple device. Although my phone does play via Bluetooth but the quality isn't there.
Thanks