- Joined
- 12 February 2005
- Messages
- 78
Cruise control, brake light and horn does not work after "stoplight on" problem
I recently had the "stoplight on" problem caused by brittle plastic knob. Pulled out the 20 amp fuse to prevent battery from draining, and car was not driven for 2 weeks. Now, after replacing the plastic knob the brake lights, horn and cruise control does not work!!!
Checked 20 amp fuse and it is good. Are there any other fuses I need to check? Nine months ago, I replaced the (36750-SE0-013) Switch Assembly, Stop & Cruise due to non working stoplight and cruise control but horn was working then. Could the stop/cruise switch assembly have gone bad so soon? Any ideas on where to start? Thanks in advance.
Wil
I recently had the "stoplight on" problem caused by brittle plastic knob. Pulled out the 20 amp fuse to prevent battery from draining, and car was not driven for 2 weeks. Now, after replacing the plastic knob the brake lights, horn and cruise control does not work!!!
Checked 20 amp fuse and it is good. Are there any other fuses I need to check? Nine months ago, I replaced the (36750-SE0-013) Switch Assembly, Stop & Cruise due to non working stoplight and cruise control but horn was working then. Could the stop/cruise switch assembly have gone bad so soon? Any ideas on where to start? Thanks in advance.
Wil