DIY: How to install a clutch and flywheel

[C-speed]

As some of you may know, C-speed Racing has been helping the Honda/Acura community over the last decade with tech articles and DIY How-to articles on our website.

We've recently updated the DIY How-to articles to include the NSX!

So without further ado, for those that would like to change/upgrade their clutch and/or flywheel:

http://www.c-speedracing.com/howto/nsx/clutch/nsx_clutch_install.php


Main How-to page:
http://www.c-speedracing.com/howto.php

Enjoy! :biggrin:

 

[Jihm]

Thank you. . .very much. :biggrin:

-Jim

 

[C-speed]

Thank you. . .very much. :biggrin:

-Jim

You're welcome

 

[lazynok]

Thanks, but none of the pictures are loading when you click them.

Not Found

The requested URL /howto/nsx/clutch/pics/DSC00558.jpg was not found on this server.

 

[C-speed]

Thanks, but none of the pictures are loading when you click them.

Oops.. fixed. sorry

 

[Thanhnsx]

I am in the middle of replacing my clutch also.. and this helps! Thanks!

 

[C-speed]

I am in the middle of replacing my clutch also.. and this helps! Thanks!

Glad it helps

 

[nikey22]

Thank you for all of your DIYs CSPEED you are terrific!

:smile:Keep them coming!!!!!!

 

[C-speed]

No problem we have a bunch more but been too busy at the moment to get to them. Stay tuned though

Thank you for all of your DIYs CSPEED you are terrific!

:smile:Keep them coming!!!!!!

 

[Thanhnsx]

Thanks again to VBNSX and C-speed for the great DIY guide. I would like to share a little bit of my part 1 experience to the rest.

enjoy!

Left side:

Bottom shot Left side

<br>

<br>
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch3.JPG">
Just got finish yanking the right axle out
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch4.JPG">
Mid shaft out
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch5.JPG">
Another shot of he right axle
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch6.JPG">
Starter out and fork pulled out
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch7.JPG">
I got out bid on a used nsx mat on ebay so yes.. this is my ghetto homemade mat for now.:biggrin::wink:
<img src="http://xoclubsc.startlogic.com//optimus/nsxclutch8.JPG">

Hope everyone enjoyed the photo's

 

[nsxhk]

Glad it helps

Very informative, thnx!

Did you miss the clutch initialization part?

Henry.

 

[C-speed]

We installed a single disc clutch in the how-to article. This no initialization is required.

We will update the article once we do a stock dual disc replacement.

Very informative, thnx!

Did you miss the clutch initialization part?

Henry.