How to remove instrumental cluster

[X 02]

Need some help with this removal. Currently, the top two screws holding the cluster bracket, two screws holding the under steereing wheel cover and the knee protection 2 screws are out. I am able to pull from the top and bottom of the cluster bracket and the knee protector. However, something seems to hold in the center part where the dimmer knob and TCS switch are. I don't want to pull it by force and risk the chance of breaking something. What should I do now? thanks.

 

[NSXCessive]

Did you remove the steering wheel column cover? See PG 23-128 in the Service Manual there are quite a few things that need to be removed before you can gently slide the cluster out.

Hope This Helps See Here: Service Maunual
http://www.nsxprime.com/FAQ/Reference/1991_svcman/1991_svcman.htm

 

[Larry Bastanza]

Give this a read.

http://www.nsxprime.com/forums/showthread.php?t=16343&highlight=Gauge+cluster+removal

HTH,
LarryB

 

[X 02]

Thanks everyone and Larry. I will pull the center panel with a soft curse. It should help. I just want to make sure "pulling" is what I should do and not that I am missing a screw or two somewhere and ended up breaking something.