Mr. Fuji's "Just Another Sebring Silver" Thread

Joined
26 June 2009
Messages
323
Location
Calgary- Canada
Hey folks. I've been on Prime for 5 years, and owned my NSX for 3. Now I have finally got around to starting an update/progression thread to share my experience, start discussions and get opinions.

This is my introductory post and I will update regularly, so enjoy!

Executive Summary:
I found and imported a Sebring Silver NSX from the USA to Canada in 2011. Have spent a few years making tasteful minor & preventive modifications, and am imminently undergoing a respray & exterior upgrade, also getting intake & headers installed this coming spring. Will update this thread as the refresh and other interesting things occur.


Long Version
Personal Introduction: Mine is a fairly common NSX story: I've wanted an NSX since my mid-teens, and as my disposable income increased the dream of becoming an owner started to become a possibility. I researched on Prime for a long time and started seriously looking in late 2010.

In spring 2011, I found a car in Portland, Oregon; the story of importing from the USA to Canada, including the ~1200-mile drive back to Calgary can be found here: http://www.nsxprime.com/forum/showt...-Early-April?p=1429699&viewfull=1#post1429699


The Car as purchased in 2011:
I bought a 1991 Sebring Silver 5-spd from a great owner (Hi Seth!) with the following modifications:

  • 1994 OEM wheels in Solaris Silver
  • Eibach Springs on Bilstein struts
  • USA Spec iPod interface
  • Integrated trickle charger
(I later found out in 2012 that the car also had a Dinan ECU upgrade, likely installed in 1991 or 1992)


IMG-20110408-00024_zpsa2e1b85c.jpg


IMG_0146_zps2c684500.jpg







MODIFICATIONS
Purpose: I don't want my car to be Just Another Sebring Silver NSX. I want to refresh and enhance the NSX to make it mine, while respecting the spirit of Honda's design. All parts will be OEM or better quality. You won't see any scissor doors or hellaflush here.

I've been inspired by some of the great looking NSXs on Prime, epecially the silver ones- you know who you are.



Upgrades, Maintenance, and Mods from April 2011 to Feb 2014:
Exterior

  • OEM Berlina Black side mirrors (from Scorp965)
  • WhiteNSXs HID kit
  • H&R spacers- 25mm rear, 15mm front
  • Guppy Attack antenna
  • OEM springs

Mechanical/Engine

  • Replace timing belt & crankshaft pulley
  • New OEM clutch
  • Cedar Ridge pulley shield
  • New clutch master & slave cylinders
  • New brake master cylinder
  • OEM ECU
  • New OEM oil pan & gasket
  • Pride V2 Exhaust
  • Pride resonated test pipes

Interior

  • Dali too-tall seat cushion (I'm 6'3")
  • NSX-R Shift boot & Civic type-R shift knob (knob is probably a knockoff)
  • NSXe-repair.com (briank) Climate Control Unit preventive fix
  • GROM iPod & Bluetooth interface


Car as of Late 2013, Early 2014:
DSC02233_zps2848bd9f.jpg


DSC02942_zps26188590.jpg



More posts to come...



- - - Updated - - -

I'm biting the bullet and getting a respray on the front hood/bumper to repair rock chips, and to rectify a colour mismatch on the rear bumper and valence that I inherited from the previous owner.

I figured that since the car is in the shop this is also the best time to update some things like the rear valence, side skirts, and hood:

Spring 2014 Modifications:


IMG_8699Medium_zps6b324d39.jpg




The above palette (from Eric at Teknotik.com) contains:

  • Pride Headers
  • Downforce Intake scoop
  • Downforce 02+ OEM-replica side skirts
  • OEM 02+ Rear Valence
  • Downforce FRP NSX-R replica rear spoiler
  • Downforce NSX-R hood (FRP top, CF under)


A big thanks to Eric and Teknotik for the very good selection of NSX products, great customer service, and excellent prices, right here in Canada!

I also have in my possession a Tommy Kaira FRP flap for the DF NSX-R spoiler: http://www.nsxprime.com/forum/showt...plicas/page3?p=1772842&viewfull=1#post1772842


I also ordered the following parts from Tim at oemacuraparts.com to reinforce the OEM valence:

  • 64412-SL0-010 x 1: Stay, R side
  • 64812-SL0-010 Stay, L side
  • 91505-SL0-003 x 2: Clip




All parts arrived at the body shop about 10 days ago, and work has begun:

Hood is prepped, and washer nozzle locations marked

1044042_10151900981246862_91600305_n_zps83bd31bb.jpg



Rear bumper off, rear quarters being prepped
1375755_10151900990151862_1507839530_n_zps97a6471f.jpg


Front end removed

1187266_10151900520876862_1010004579_n_zps0ba603ab.jpg
 
Last edited:
Great news! Yesterday my bodyshop guy (a good friend of mine) and I decided based on paint supplier recommendation that he will be repainting all exterior body panels that are currently silver: front & rear bumpers/valences, headlight covers, all 1/4 panels, doors and trunk), as well as the NSX-R hood, DF side skirts and OEM rear valence. This is to avoid colour mismatching issues. it will be a bit priecy, but will look amazing.

As for PPF, I had previously planned to do bumper/hood/roof/pillars in xPel ultimate, but now I am seriously considering doing the whole car- to protect my investment. Means I'd never have to worry about rocks again!

This is what we in the Project world call scope creep.


Photos:

Spoiler, gurney flap, and engine hatch garnish with a fresh coat of NH-547:
received_m_mid_1395720526434_9aea349c92c58e6302_3_zpsgzgycwkh.jpeg


received_m_mid_1395720526434_9aea349c92c58e6302_1_zpsenyuozdv.jpeg


received_m_mid_1395720526434_9aea349c92c58e6302_0_zpscx59068w.jpeg
 
Last edited:
Update: Things are looking good, mostly!

The Downforce hood has been cleared underneath and primed up top.
received_m_mid_1396033400998_d6038a1c2cfb4f0883_0_zpslchzoy5c.jpeg



Hood test fit looks great:

received_m_mid_1396039445097_adc537030188918005_0_zps0tisymvr.jpeg



The on tough part so far is the side skirts, it appears that the front sections don't have the curvature they should.
I am not the first person to do this upgrade, so I have faith this will get sorted out pretty easily, this body guy has lots of great experience and satisfied customers. That said, if anyone has done this and wants to give advice, please do so.

received_m_mid_1396041845452_9a460fd827e1f02897_0_zpszfownsjx.jpeg


Front sections:

received_m_mid_1396041877830_e9c2c78c14e5509823_0_zpsciydkpch.jpeg


received_m_mid_1396041877830_e9c2c78c14e5509823_1_zpsqixxgf2a.jpeg


The rear bumper that has the incorrect colour applied is not taking the new paint very well. I'm told it is from poor prep when the previous colour was applied.
received_m_mid_1396043316740_96cc3fc9a080323486_0_zpsqxvukqzp.jpeg
 
Last edited:
Update: the bodywork is taking longer than expected, luckily I have some spare time built into my schedule.

received_m_mid_1396468771063_4eb023c5b088c11947_3_zpsltyqncbv.jpeg


I am looking at an extra week now.
 
Last edited:
In my research for this project I read that there has been issues with aftermarket hoods in general, including previous versions of the DF NSX-R replica. I've seen the way some other hood brands fit, and they weren't up to NSX standards if you ask me.

Eric at Teknotik has a recent DF hood on his car, and is very pleased with the fit.

Next time I get to the shop, I can take some detailed photos and elaborate on the fitment with comments if anyone is interested.
 
Last edited:
Progress Update- includes hood fitment

There is 1 week to go until the body & paintwork are complete, and everything is progressing well!
The dust on the car and fluorescent lighting are making for poor photo quality, my apologies.

Rough sanding & prep is essentially complete and awaiting final sanding. The side skirts are good, except for a small item on the passenger side (more on that below):

DSC_000001_zpsjxpiozrj.jpg




I think the next few pictures make a compelling case for anyone interested in a full PPF of their NSX:
DSC_000001_zpswqa0qwtg.jpg




DSC_000001_zpskkwnp1ht.jpg

DSC_000001_zps0fmjjgvv.jpg



The small part at the front of the passenger-side side skirt (these are Downforce OEM 02+ replicas) still won't fit 100%, but my guy will fix it up shortly. I am still happy I didn't go with the Honda skirts, the price and having to drill into my doors was not appealing.

DSC_000001_zpscbzdkv5d.jpg




The Hood
The inclusion of an aftermarket hood was my biggest concern on this project. I have read about & seen photos of what passes for "9/10" fitment for aftermarket hoods from several manufacturers, and was almost scared into sticking with the boring 1991 OEM hood. After some discussion with Eric at Teknotik I decided to take the plunge, and am very glad I did.

The hood fitment is amazing. I have seen only 3 other aftermarket NSX hoods in person, but this has them beat hands down. The hood as it sits currently is bolted on with no fine-tuning or adjustments made; I suspect once paint is applied and everything put back together it will be indistinguishable from an OEM fitment.

Below you can see that the panel gap is consistent all around, and the hood arch matches the fender arch, spot on. My only negative comment on fitment is that the hood sits high nearest the window on the passenger side, by about 1/8 of an inch. Again, this is before adjustments and corrections so I expect this minor niggle to disappear.

I am VERY happy with the Downforce hood.

(The dust and harsh lighting in the shop may make things look a little wonky here or there, but I assure you with the human eye they are very good.)

DSC_0196_zpsxhpomiff.jpg



DSC_0197_zpstgdxh1px.jpg



DSC_0198_zpsyval0dtg.jpg


DSC_000001_zpskodvbwir.jpg


DSC_000001_zpslcaed6nc.jpg



Other items: The front bumper is fully prepped and awaiting painting.

The DF NSX-R spoiler and Tommy Kaira Gurney Flap are complete, and will be mounted on the car at the completion of paint/body work. I am also getting my OEM Sebring Silver spoiler repainted to match the rest of the body, I will take a photo of that later.

Next steps: My detailer is booked for later this month, and the Xpel installer in early May. Mechanical is scheduled for shortly thereafter...and the NSX should be all refreshed and ready to roll by the 2nd weekend in May.
 
Last edited:
Paint and bodywork were all completed a couple of days ago:
10157172_10152018006041161_5921103042929772026_n_zpsd5cdc422.jpg


Just had a full exterior detail and fresh Opticoat applied. This car is SHINY!
I will upload some before/after photos soon.
This guy is arguably the best in town, very meticulous.
DSC_0212_zpsu7m1ldf6.jpg


Next steps are protective film and mechanical upgrades!
 
Last edited:
Looking awesome Mr. Fuji!

after looking at your car makes me want to paint my car back to Sebring Silver!
 
Back
Top