My new Dreamzsports Type R Gundam Wing

[khappucino]

ok so i installed my new Dreamzsports CF NSXR style wing the other day, first off, i think that god himself must have applied the OEM sticky tape on my car because it took surgical precision with a box cutter to get rid of the tape, i tried decent gauge fishing wire but it just ate/broke/stretched the fishing wire during sawing, i tried larger guage but the guage began to approach the gap between the wing and the trunk lid so i took desperate measures :biggrin:

anyhow i'm pretty happy with it, had to do add some self tapping screws to the LED housing because one of the screws was stripped, other than that I was pretty happy with the result. (thanks B-rad)

so here goes, terrible lighting, and dont crack on my wheel gap :biggrin:
as len3.8 can probably verify, my drive is a tad steep and makes it quite challenging to get into even. I was going to get some Vinny Side Skirts next BUT i'm scurred that I will bottom them out every time i drive home =(, I have to drive into my driveway at about 30 degrees to make it in alive :redface:

oh yeah my car is dirty too so dont hate :biggrin:

http://www.khappucino.com/wing1.jpg

http://www.khappucino.com/wing2.jpg

http://www.khappucino.com/wing3.jpg

http://www.khappucino.com/wing4.jpg

http://www.khappucino.com/wing5.jpg

http://www.khappucino.com/wing6.jpg

http://www.khappucino.com/wing7.jpg

http://www.khappucino.com/wing8.jpg

 

[xxx]

Not my thing.

 

[khappucino]

understood, its kinda mine, i'm still 25 and a ricer at heart :biggrin:

 

[comquat1]

Nice wing, when you are ready to sell those rims, please pm me.

 

[vtecNSX1]

Where did you buy it from?

 

[khappucino]

actually B-Rad hooked me up, i put a WTB ad out for the wing

 

[YUMNA2]

understood, its kinda mine, i'm still 25 and a ricer at heart :biggrin:

not rice, but very nice! i like it.

 

[B-rad]

David, the Wing looks great on your car.

Brad

 

[transdzn]

I like it! Now lower it :biggrin:

 

[FuryNSX]

Lookin' good!!! Maybe I should've kept mine CF.

(But Vizal is right.)

 

[khappucino]

thanks for the compliments guys :biggrin:

hm... do you guys have any idea what the car looks like sans, the lower lip?
see i was going to lower it, but at oem height i scrape the crap out of my lower lip (so much for my idea of getting the GruppeM CF lip :redface

so i wonder, if i remove the front lip and lower ride height like 2 inches, i may be able to survive the driveway 'gauntlet' yet. anyone got pictures or photochop action without a lower front lip?

btw... lol they dont make CF roof cover do they, my friend pointed out that it could be interesting to get the 'cf trunk lid', 'cf b-pillars', and 'nsxr cf hood', in addition the CF wing, since it would be like a gigantic Carbon Fibre racing stripe down the middle of my car from front to back hahahaha, not sure how good/bad that would look, but then i realized that the roof would still be berlina black, any ideas? =)


hm.... also i need to do some prestidigitation with some numbers, see i'm running 215/40/R17 up front, and at sharp turn angles i already burn a hole in my fender liner, how much scrape action do you guys get when you lower your cars 1-2 inches?

 

[NoMiEzVR4]

nice car and wing.

 

[NSXWIND]

cool wing :biggrin:
BTW I have one too :biggrin:

 

[Pirana]

how much and where to get it.....btw looks great!!

 

[evof575gtc]

Nice

 

[khappucino]

how much and where to get it.....btw looks great!!

hehe, well using the great nsxprime market place, i set a WTB Dreamzsports wing, and got it from B-Rad for $300 shipped :biggrin: i do not believe that they make these new anymore but i have seen them for around that price on ebay and on the marketplace here from time to time.

 

[4AU4LIFE]

Have a question for you or any other owner about the fit in one area.
On either side of the wing where it slopes down to meet the squared off location for the stock wing, is the DS rounded in the shape of say a spoon and not sit flush?

 

[khappucino]

Have a question for you or any other owner about the fit in one area.
On either side of the wing where it slopes down to meet the squared off location for the stock wing, is the DS rounded in the shape of say a spoon and not sit flush?

you are correct, the point that meets the original end location of the spoiler is indeed rounded and does not sit completely flush, i believe there is about 5mm gap or so.

 

[4AU4LIFE]

you are correct, the point that meets the original end location of the spoiler is indeed rounded and does not sit completely flush, i believe there is about 5mm gap or so.

Thanks for the info.

 

[BostonNSX]

I have a red one

 

[menuserve]

damn thats nice... i'd like one of these painted berlina black.