SOLD
For sale is my spare pair of OEM NSX engine mounts that have been filled with urethane via the Cedar Ridge Fabrication kit. I somehow have two sets of mounts and can only use one at a time obviously, so don’t really need these..
As mentioned, the mounts are the OEM Honda ones that have been filled with polyurethane and use the Cedar Ridge Fabrication plates on both mounts. Dave recommends only filling these two mounts and leaving the third mount on the side of the motor as is. They’re a nice set for someone who wants a little stiffer than stock without all the harshness / NVH of fully solid motor mounts; they're also a nice replacement if your OEM ones are starting to crack like they all seem to eventually do. Both mounts are very clean and in good condition.
$200 shipped for the pair in the US.
For sale is my spare pair of OEM NSX engine mounts that have been filled with urethane via the Cedar Ridge Fabrication kit. I somehow have two sets of mounts and can only use one at a time obviously, so don’t really need these..
As mentioned, the mounts are the OEM Honda ones that have been filled with polyurethane and use the Cedar Ridge Fabrication plates on both mounts. Dave recommends only filling these two mounts and leaving the third mount on the side of the motor as is. They’re a nice set for someone who wants a little stiffer than stock without all the harshness / NVH of fully solid motor mounts; they're also a nice replacement if your OEM ones are starting to crack like they all seem to eventually do. Both mounts are very clean and in good condition.
$200 shipped for the pair in the US.
Last edited:
