Parking Brake Cables

[Hagasan]

I recently fitted some Stoptech ST-40 calipers, all good. My question is about the parking brake. It's a Brembo caliper. I doesn't use the OEM attachment on the caliper end of the cable like the current Stoptech e-brake does. The cable end is just a straight through and hook over type of end. I'm not sure if it's just an early design caliper since superceded by Stoptech. They have said they don't recognise it...

I believe the e-brake caliper is the same part in the Brembo GT BBK. Does anyone know where you get the "custom" NSX type cables with the correct attachment for the caliper?

Thanks


Edit. The second picture is the type of brake cable I need. It has an SL0 part no. on it but it must be modified by Brembo? Where can I buy these cables?

 

[Jeff@Carbon6]

Can you post a picture of the cable side of the e-brake caliper?
There are a few different set ups used on those depending on the original application.

 

[Hagasan]

Can you post a picture of the cable side of the e-brake caliper?
There are a few different set ups used on those depending on the original application.

Some pictures added...

 

[Jeff@Carbon6]

Those look similar to what I have seen/used.
You can bore out the hole so the factory cable goes through and sits on the oem seat, cut off the top of the "P" shaped arm on the lever, drill a hole in that lever and use a small bolt to attach the cable to the lever.