POST ONLY if your turbo.....

[adrenaline_nsx]

Just looking to see how many of you guys are out there? In the process of building mine and looking to get some ideas. thanks

Post turbo setup, dyno, fuel management, and motor build.

 

[v8killer]

Lovefab,508 rwhp @ 14lbs.,AEM, low compression (9.2 to 1)rebuild from SOS.I have 3k trouble free miles.

 

[winreboot]

DIY single turbo, 400hp @ 13lbs 380tq. AEM, low compression 9:1 rebuild.

 

[tonyb]

Custom build system from PFISpeed in Fort Collins, GT35R67 turbo, 530 rwhp, 440 ftlbs @11.5psi with air to water and low compression build, 9:1

 

[01blacks4]

home made single turbo precision pt67, lower compression and built motor 9.2:1. AEM, 750 cc injectors, air to water ic, 15.8 psi , 664 rwhp 495 tq almost 10,000 trouble free miles

 

[NA1MT]

custom built kit.....HTA GT37R, AEM stand alone....currently being retuned with bigger injectors. Original dyno was 580hp 490tq @ 16psi. Built motor 9.2 :1 compression

 

[angus]

Prototype (#2) CT/Kinetic turbo kit (built by me) , t67 , 5 psi stock motor , 360whp dynojet , 5000+ miles

 

[scorp965]

HP Performance turbo, watercooled Garrett T04S, 8.0psi, stock motor (AEM EMS), 408rwhp/314rwtq, about 8000 miles.

 

[menfou]

Home made Turbo Kit.
GT4088R Turbo TwinScroll
Stock engine
525whp at 10PSI with 93octane
No oil pump
15000miles, and no problem

 

[Devin@AEM]

Lovefab turbo kit, Precision PT67, 555 WHP, AEM EMS, 9.5:1 low comp build

 

[Vega$ NSX]

Factor X 500 Turbo
550 whp / 573 ft-lbs tq
GT 35/40
16 psi
Built engine (9.5:1 compression)
HKS Fcon

 

[adrenaline_nsx]

so many different setups, keep em coming.

 

[NSXRAMR1]

Prototype (#1) CT/Kinetic turbo kit (built by Angus) , t67 , 12 psi stock motor , AEM EMS, 10 000kms 11.9@121mph

 

[Cody@LoveFab]

LoveFab Stage 4/custom kit. GT45R. 920whp/641wtq, current Street NSX World Record. AEM EMS. 9.5:1 build with ~20k miles.

 

[brandonsan]

Lovefab Stage 3 Turbo, PT67, 8 PSI, 397 WHP, 318 trq. BONE STOCK bottom end with MSL EMS. 1ST production kit and NO PROBLEMS after nearly 3 years of service.

 

[WOODY]

Lovefab turbo on sleeved 9.5:1 -3.2 L, ARP bolts, MLS gasket air/water cooled 21 PSI , has not been dynoed since last boost increase...600 maybe? ~35,000 miles with no turbo related issues.

 

[Maximumyield]

1st & only Canadian Lovefab Turbo to my knowledge :biggrin: , AEM, T67 original install 10psi 480rwhp dynopack, now running 14psi should be around 510 rwhp on mustang dyno. 9:5:1 forged pistons SOS build.Approx 10,000 miles.

 

[armyLT]

LoveFab stage 1 w/ refreshed motor, ARP Head Stud Kit, MLS head gasket set. about 6.8 lbs boost making 399 HP.

 

[dynomike]

AutoWave Turbo kit 3.0 9:1 custom engine Gt4094r 575whp@12psi on 91 octane

AutoWave turbo kit 3.2L 9:1 engine gt4088 580Whp at 12 psi full boost at 3700rpm on 91 octane

Danny"s custom twin turbo Setup 850whp twin 35rs VP C16 fuel

Soon to have a third autowave turbo setup up and running just finished the weldon fuel system on it should yield right at around 750whp on race gas using a gt4088r:smile:

 

[menfou]

I want to order 9.2:1 pistons, I need to buy 90.5mm piston and adjust the cylinders ?

 

[adrenaline_nsx]

I want to order 9.2:1 pistons, I need to buy 90.5mm piston and adjust the cylinders ?

Who sells 9:2:1 comp pistons and what brand are they? they will need to hone out the cylinder walls for the larger piston.

 

[adrenaline_nsx]

Lovefab turbo kit, Precision PT67, 555 WHP, AEM EMS, 9.5:1 low comp build

Im thinking about going with the PT67, Ive seen great numbers come out of these.

 

[nathan]

LoveFab stage 1 w/ refreshed motor, ARP Head Stud Kit, MLS head gasket set. about 6.8 lbs boost making 399 HP.

Umm, arent you running 7.8psi on that kit?

 

[01blacks4]

Im thinking about going with the PT67, Ive seen great numbers come out of these.

ill sell ya mine

its making the most on here, from a pt67

 

[warren1205]

have you looked into the pt 62/62? Producing really nice number. fast spool great tq and more hp compared to a gt40 or 67