Procar Specials NSX

[Procar Specials]

for all who must save money in this difficult times, we also have some small goodies, who can make you happy.

some original armrest emblems are attacked by Patina over the years (old/new) and doesnt match with the rest of the car.





if requested, there is also this part available (1/2 pcs)
Logo cant be pealed up, because its under the clearcoat.
Scratches can be polished out very easily, since over years, it will look like new.
Where I know?

 

[BBVNSX]

Do you still offer this part?

I like The Idea of a working rear undertray...

 

[Procar Specials]

Do you still offer this part?

I like The Idea of a working rear undertray...

YES, but we need some time for production.

In year 2008 we had the idea to build something like that, because our old version, which we build for Dali Racing, was a bit too small.

10 units of the RGT cf diffurors were produced over the years, with all special, adjustable mounting stuff and 9 units were sold.

I only have my unit in stock, which is actually not installed because of my MUGEN header/exhausts tests.

But as mentioned, its still possbile to get one.

 

[BBVNSX]

It looks great Detlef! Is the part functional? No problems with engine temp/ exhaust heating? Also have you ever tested it at very high speeds?

Thanks!
Bruno

 

[Procar Specials]

It looks great Detlef! Is the part functional? No problems with engine temp/ exhaust heating? Also have you ever tested it at very high speeds?

Thanks, well its a proper designed part and with the camloc superfasteners, the installation is very easy......simular to a race car.
A prototype was installed at the NSX-R 24h race car, big advantage because the big GT wing could be removed and replaced with my version of the NSX-R spoiler.
Same corner speed but ~ 10 km/h faster at the Döttinger Höhe straight

I had it installed for many years and there was no problem regarding temperature also.
Most of airstrem will be canalized under the diffusor, the small amount over the diffusor cools the exhaust system, air will be leeded throught the mesh of the rear valence.
So,its functional, yes.

Over the years, I have seen many NSX diffusors, which looked horrible.
Think this RGT version looks like it should be IMO.

 

[BBVNSX]

Well, for me is something I might consider in the future. From the pictures, It does look like it reduces rear clearance significantly, I don't DD my NSX (not even close...), but the car must be usable in the street... but I know that if you want some functionality on the diffuser, clearence must me reduced!
It is for sure one of the best options out there (from very few available), and the only one i know that can be used together with the OEM NSX-R rear small diffuser :wink:

From the Picture you attached, the diffuser is on the NSX-R Prototype, do you know the reason why Honda didn't let the diffuser make it to the production car?

 

[furinax]

That looks really good! Does it fit under the R-GT rear bumper or is the name just a coincidence?

 

[Procar Specials]

It will fit under under the R-GT bumper too. The mounting points are not at the bumper. I designed it to fit with all NSX years. Its right that this part is not designed for a daily driven NSX, but with some care during driving and the right angle at speed bumps, there is no problem. Where I know?

 

[Jim]

It will fit under under the R-GT bumper too. The mounting points are not at the bumper. I designed it to fit with all NSX years. Its right that this part is not designed for a daily driven NSX, but with some care during driving and the right angle at speed bumps, there is no problem. Where I know?

Oh so it will fit 91-01s?

 

[Procar Specials]

Yes

 

[Procar Specials]

short preview from our new Bilstein/H&R suspension.
We will build 5 units next winter.....so let me know if you are interested.
Please change view for 4K

 

[bpgt]

I may have missed it in an earlier post, but what is the price for the diffuser (and estimated shipping to US)?

 

[Procar Specials]

I may have missed it in an earlier post, but what is the price for the diffuser (and estimated shipping to US)?

New: 1200 Euro
Used 1000 Euro
shipment destination USA ~ 250 Euro

production time after incoming order is ~4-6 weeks

 

[Procar Specials]

Because of the high requests we are able to start a new production of these parts

cf bumper beams front and rear
cf B pillars
cf side vents

gen 2/3 parts are parts from production year 2020

 

[Procar Specials]

Oh man......

My NSX is nearly 28 years old now, not many original screws are on the place they should be, but I'm still a lucky guy to own this beauty.

Over the years, my lady lost nearly 200 kg, with ~ 1171 kg she is one of the lightest NSX worldwide, but still with working AC and stereo system.
The NSX-R hype inspired me, to do all that crazy expensive installations, most of them better and lighter than the original, but I never regret.
Also an honor for me, that Honda Racing Europe contacted me to build a 24h racing car with the basic NSX-R 2002.
That was a real honor for me, many of my parts were installed and survived the hardest 24h race worldwide.

Not sure, how many thousands of hours I worked on my NSX, but she also gave me the best time of my life.
She inspirated me to start business with Procar Specials, a passion, which still holds on.
I dont do that for making money (lost 6 digits numbers of USD to Dali Racing in earlier 2000 ) but its nice to count over 1000 customers worldwide.
I'm a small furt into the universe, but to all:
A big thank you, I'm very honored.....its unbelievable.


My x still have a very nice ass and makes me breathless, every time if I do remove the car cover.
I assume that this car will survive me, for sure.

She is too shy (and expensive) for the typical poser events and she like it being stored anonymous into her 'small' garage.





But sometimes....if she want....she will get full attention. (What makes me jealous and proud same time)

 

[95gsrturbo]

Honored to say I have one of your parts
Sad to say I cannot afford more [emoji23]

Sent from my SM-G988U using Tapatalk

 

[Procar Specials]

Thank you very much that you like my parts.
I'm overwelmed that I got so many orders and nice comments after all these years.

Let me know if you will need a Procar part into the future, good customers will get discounted prices.

 

[docjohn]

Good to see you back!

 

[Procar Specials]

Good to see you back!

Thank you very much.
I'm happy that some people remember me.

 

[Procar Specials]

We also did some special work for special customers last 5 years.

our limited edition toilet seat
if you send us a picture from you butt, we can make it comfortable for your..... or the butt of your wife. :tongue:


with toilet paper cf holder as well...with your favourite car logo.



special ultralight cf switches for the Procar garage as finger exercice......we are very proud of it, because Merten is interested




ultralight cf seat buckets under 2 kg


cf wheel


as main job
Restauration for the Porsche Museum




GT1 rear hatch


front as well


doors


and as my 2nd passion...old Porsches as superlights with ???? power


we can do that!
Yes....we can

 

[NSX2play]

Welcome back and WOW - amazing work!

 

[natcc99]

We also did some special work for special customers last 5 years.

our limited edition toilet seat
if you send us a picture from you butt, we can make it comfortable for your..... or the butt of your wife. :tongue:

haha...light weight for those middle of the night pit stops.

 

[furinax]

LOL Carbon fiber toilet seat. Totally something every car guy needs!

I love that diffuser. It's great to see your passion last through all these years. I tried to read through this thread but stopped on page 20 something. Just too much content to go through.

What are your thoughts on forged carbon fiber? It seems to be the trend nowadays with hypercars but from what I read they are just much cheaper to produce. On facebook I see some guy had some custom CF parts made from VIS I believe. I think it looks great but it's not for me.

 

[Procar Specials]

LOL Carbon fiber toilet seat. Totally something every car guy needs!

I love that diffuser. It's great to see your passion last through all these years. I tried to read through this thread but stopped on page 20 something. Just too much content to go through.

What are your thoughts on forged carbon fiber? It seems to be the trend nowadays with hypercars but from what I read they are just much cheaper to produce. On facebook I see some guy had some custom CF parts made from VIS I believe. I think it looks great but it's not for me.

Yes, passion starts 1991, first time I saw the car. But I have to save money til octobre 1992, before I could buy this japanese masterpiece.

Forged carbon fiber?
Have some shoes from Porsche Design with that.......but I'm an old school carbonfiber guy and go on with that.


This is the my passion and my style.

 

[Procar Specials]

Another passion is the FK2R, in USA you have the FK8 as mass car now.
This one is very rare.
Its the 'more' hardcore version with the same engine.