• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Suspension Set of four Bilstein shocks in excellent condition

Status
Not open for further replies.
Joined
10 May 2012
Messages
136
Location
Eastern Virginia
Selling set of four Bilstein shocks (2 front, 2 rear) for 1991-2002 Acura NSX. Selling them because I switch to KW V3s.

Allow setting the car at two heights; stock height and lowered ~5/8". You can have additional grooves cut into the shock body if you wish to lower the car further.

These work fine with stock or aftermarket springs and include everything shown; just use your stock shocks' top hats and stock or aftermarket springs.

The shocks work perfectly and look very good. A couple of the Bilstein decals have peeled up in a few spots. The shocks have the original bushings on them,
which work fine, but can be replaced for a few bucks each if they ever wear out.

Front shocks are part #F4-B46-1663-H0 (same as part #B46-1663 and part #24-016636 ).
Rear shocks are part #F4-B46-1665-H0 (same as part #B46-1665 and part #24-016650 ).

Copies of Bilstein's somewhat vague instructions and parts diagrams are included, but you're better off following the excellent DIY in the Wiki.

$400 + shipping + PP fee.

Examples of estimated shipping costs, including insurance: to New York City, $20; to Chicago, $34; to Atlanta, $24.

Thanks!
 
Status
Not open for further replies.
Back
Top