• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

Sun ruined ABS reservoir (plastic)

Joined
6 June 2003
Messages
380
Location
Phoenix, AZ
I have an aftermarket hood and the sun hit the plastic reservoir tank and basically ate it up. Of course, the reservoir tank cannot be purchased separately and the entire abs unit costs around 2k. I have seen the 91-92 abs units offered for sale which have the square reservoir tank rather than the longer rectangular one... Question--have any of you taken the reservoir off and had one duplicated? If so, I would like info on who did the work etc.
 
I have an aftermarket hood and the sun hit the plastic reservoir tank and basically ate it up. Of course, the reservoir tank cannot be purchased separately and the entire abs unit costs around 2k. I have seen the 91-92 abs units offered for sale which have the square reservoir tank rather than the longer rectangular one... Question--have any of you taken the reservoir off and had one duplicated? If so, I would like info on who did the work etc.

Wow, sun ate up the tank? How long did it take to do that?
 
Actually, all of the individual parts of the ABS/ALB are (or at least were) available

B-24-10 ABS Modulator (LH) (-'99) NSX
01 46175-671-651 5.0 SCREW, SOCKET
02 46472-568-000 1.0 PACKING, OIL BOLT
03 46669-692-003 1.0 SEAL, RESERVE TANK
04 57110-SL0-L01 1.0 MODULATOR ASSY.
05 57115-SL0-J02 1.0 BRACKET, MODULATOR
06 57116-SP0-305 2.0 HEAD SET A, MODULATOR
07 57118-SG0-801 4.0 O-RING, HEAD
08 57119-SL0-L00 1.0 GUARD, MODULATOR
09 57119-SL0-003 1.0 MARK, RESERVE TANK (ABS)
10 57120-SL0-013 2.0 PISTON COMP.
11 57121-SG0-801 2.0 SPRING, FR. MODULATOR
12 57141-SF1-801 2.0 SPRING, RR. MODULATOR
13 57174-SL0-A00 1.0 BRACKET, COUPLER
14 57181-SL0-951 1.0 HEAD COMP., SOLENOID (A)
15 57184-SL0-951 1.0 HEAD, SOLENOID (B)
16 57186-SL0-013 2.0 PLATE SET, SOLENOID
17 57188-SB0-801 1.0 JOINT, PUMP
18 57189-SL0-003 2.0 O-RING (P25.5)
19 57191-SL0-A01 1.0 TANK COMP., RESERVE
20 57193-SL0-003 1.0 FILTER, TANK
21 57196-SK7-003 1.0 CAP COMP., RESERVE TANK
22 57200-SL0-003 1.0 SOLENOID SET A, ABS
23 57204-SP0-003 4.0 O-RING C, SOLENOID
24 57250-SL0-003 1.0 SOLENOID SET B, ABS
25 57341-SL0-003 1.0 O-RING (P3)
26 57345-SL0-003 1.0 VALVE ASSY., RELIEF
27 90170-SL0-000 3.0 BOLT, FLANGE, 10X50
28 90673-SK7-A01 2.0 BAND, HARNESS
29 93403-0601605 1.0 BOLT-WASHER, 6X16
30 95701-0601605 4.0 BOLT, FLANGE, 6X16
31 95701-0601808 4.0 BOLT, FLANGE, 6X18
32 95701-0802005 3.0 BOLT, FLANGE, 8X20
33 95701-0803208 4.0 BOLT, FLANGE, 8X32
34 95701-1003208 2.0 BOLT, FLANGE, 10X32
35 57140-SL0-901 2.0 PISTON COMP., RR.
 

Attachments

  • ABS_Modulator_B_24_10_UpTo99.GIF
    ABS_Modulator_B_24_10_UpTo99.GIF
    57.6 KB · Views: 1,550
I guess this confirms why the NSX-R has a cover over the coolant tank in the engine bay, as the mesh cover exposes it to sunlight.

The tank is under the hood and not in a place I could imagine it would get sun - even with a NSX-R replica hood.

How did the sun eat up your tank? :confused:
 
While I'm looking for the other EPC disk with the 1991 info, I'd thought I'd post the rest of the ABS system


1 46462-SE0-000 003 BOLT, OIL
2 46472-568-000 007 PACKING, OIL BOLT
3 57070-SG0-801 001 ACCUMULATOR
4 57088-SL0-003 001 BRACKET, ACCUMULATOR
5 57090-SL0-J00 001 PIPE, ACCUMULATOR
6 57139-SB0-801 001 O-RING
7 57188-SB0-801 001 JOINT, PUMP
8 57199-SB0-801 002 CLAMP, HOSE, 14MM
9 57310-SL0-003 001 PUMP ASSY
10 57311-SG0-801 001 PUMP COMP
11 57318-SL0-000 001 COVER, ABS MOTOR
12 57348-SB0-801 001 BLEED, AIR
13 57349-SB0-801 001 CAP, AIR BLEED
14 57355-SL0-J00 001 BRACKET, PUMP
15 57358-SH9-800 003 MOUNT, PUMP
16 57360-SL0-003 001 MOTOR ASSY., ABS
17 57364-SB0-801 001 O-RING, MOTOR
18 57370-SL0-J01 001 HOSE COMP., PUMP
19 57374-SL0-J02 001 CLAMP, HOSE PUMP
20 57375-SL0-J01 001 BRACKET, ACCUMULATOR
21 57377-SL4-800 006 WASHER, ABS PUMP
22 57380-SL0-J02 001 HOSE, PRESSURE
23 57390-SM4-003 001 SWITCH ASSY., PRESSURE
24 90127-SB0-801 003 BOLT, SENSOR LOCK, 6X12
25 93401-0601205 002 BOLT-WASHER, 6X12
26 93403-0601608 001 BOLT-WASHER, 6X16
27 95700-0603208 001 BOLT, FLANGE, 6X32
28 95700-0606008 001 BOLT, FLANGE, 6X60
29 95701-0602205 003 BOLT, FLANGE, 6X22
30 95701-0602808 003 BOLT, FLANGE, 6X28
31 95701-0603205 003 BOLT, FLANGE, 6X32
 

Attachments

  • b-24-20 ABS_small.GIF
    b-24-20 ABS_small.GIF
    33.8 KB · Views: 212
Hi Drew-

Is there somewhere we can order these parts (o-rings n'such) as they are not available from Son's Acura online, etc?

I have a leaky solenoid and would love to rebuild my ALB/ABS unit but lack of parts is keeping me from cracking it open.

Many thanks,

-CoA
 
DaliRacing can order parts from Japan.

Data points: Honda has one Electronic Parts Catalog (EPC) for North America, this is the one you see on USDM/CDN parts suppliers, and a completely different EPC for the rest of the world.

So if you can find a supplier outside of US/CDN they should be able to get the parts for you.

Next, the ABS system is made by NISSIN, very common OEM brake supplier, they even have a US presence. They should be able to point you in the proper direction
http://www.nissinbrake.com/

Large brake warehouses can get just about any Nissin part you need. There are also US shops that rebuild this ABS unit (same as Legend and others), if you search these forums you will find my past knowledge base postings on this subject.

Drew
 
Back
Top