TCS indicator with AEM EMS

[dfdtruckie]

Apparently the TCS doesn't work when you install EMS. How do I disconnect it so that the light on the dash goes away?
Thanks

 

[Honcho]

Like the SRS plug in the steering column, I think you have to jumper the TCS light pins Easiest way probably is to unplug the TCS unit on the firewall (since you're not using it anymore) and find the pins in the harness that send the ground to the dash light and jumper them with a short wire. Are you going to use the TCS in the AEM? Might be worth it, as it is a ncie safety feature.

 

[dfdtruckie]

My understanding is that when you use the EMS the TCS is disabled. Am I able to use it with the EMS? The harness behind the drivers seat needs to be unplugged? Just disconnect the wiring harnes(I think 3 bundles) and tie them off?

 

[angus]

Yes, you simply need to unplug the TCS unit behind the driver's seat, if I remember correctly you only need to unplug on and the light will go out.