Tire Wear

Joined
4 July 2005
Messages
44
Location
Los Angeles area
I read in multiple places that the toe settings for the 91-93 NSXs caused premature wear on tires. This was supposed to have been corrected for model years 94 and newer. I was wondering if this correction can also be made on the earlier years as well by just adjusting the toe in/out or do new suspension components have to be purchased? Or is it not possible for anything to be done at all for those model years?
 
As noted in the FAQ section (thanks Brian!), the suspension is exactly the same, and it's just a matter of where you adjust it to. In fact, when the recommended toe settings were changed, they were made retroactive; if you go to a dealer, unless you request otherwise, a '94 will be aligned to the same specs as a '91 (4 mm rear toe).

If you prefer, you can even ask to have it aligned to the original 6 mm specs (for more aggressive handling) or to even less toe (2 mm or 0 mm) (for longer treadlife).
 
Back
Top