Recent content by 97NSX-T

Hi Mario, I would stick with Warren's excellent DIY guide for DRL's - it's what I used on my US NSX, & it works like a charm. IMHO, There is really no good reason to spend literally hundreds of $$ just to try to mimic original functionality, unless money is no object :smile:. If you want to...

Hey guys - I know this is an old thread - so the knowledge is out there somewhere :-) (but not even in the USA SPEC PA11-HON "manual", or google) - through the head unit, how do you get a song to repeat on the iPod? And, yes, I've tried the REPEAT button on the display... TIA

Sorry for the clarification - but as this thread has been referring to both CANBus bulbs & "regular" LEDs - which were the ones you ordered from Superbrightleds? - thanks!

Could someone explain to me (in common English the difference between a "normal" LED & A CANBUS LED please? I just went through & installed the brake light LED's (with McRider's jumper fix), and had the same problem as this Primer - my radio would dim every time I put on the brakes :-(...

Ok - I've taken the plunge & have ordered all the LED's - can you tell me how to do the calculation for the require size of the shunt resistor(s) in the flasher conversion please? Thanks!

OMG!! 6 WEEKS?? That's crazy!! :eek: I also had my NSX shipped from Florida (to Blaine Washington) - but it only took 6 DAYS! I then simply drove the NSX across the line. For Fugy / nsxsimon & anyone else looking to ship - I would wholeheartedly recommend MONTWAY Auto Transport. Enclosed...

Sorry for the newbie question - but converting the flasher unit as per the DYI is only if you are going to run the LED's without load resistors, correct? If you were to run the LED's with the load resistors, you wouldn't have to deal with converting the flasher unit, but then you would have to...

thanks guys - I'll check it out!

I'm looking for the LED equivalent of the standard flasher relay 38300-SL0-013 so that I don't have to run the LED resistors for my next upgrade (LED turn signals) at each corner. I've looked all over the forums / google, but no luck. I'm sure I'm not the first one to do this, so any help would...

Hi Alec, That actually sounds very close - as I'm nowhere near being an electrician, I would have no clue on how to even begin with your suggestion, which sounds right on. I did find another thread where they had done something similar (but still not exactly as you've described) & asked for...

I know this is an old thread - but can you tell me which LED's you used for the turn signals?, did you have to change the flasher?, & lastly, but most importantly - it looks like you possibly swapped the wiring & plugs for the turn signals / corners (as your corners are now flashing), & possibly...

Did you every receive any info / figure out how to do this?, as I'd love to have this setup also...

Thanks so much Mike!

Hi guys, Back to the earlier part of the thread - I have the same error code for the Rear Secondary HO2S Heater Circuit Malfunction (Bank 1 Sensor 2) code (for 97 NSX). There are a couple of different part numbers listed earlier in this thread, and on calling the dealer, I get another part #...

So - does that mean you have actually found the car of your dreams? (from the links I sent possibly? :-))