Recent content by CiaoBoy

Please count me in for this batch! -CiaoBoy

Yeah, I made sure to set the rebound and compression with the tiny tools provided in the box. I chose the KW recommended settings for the NSX, even though I read your post about the more aggressive settings for mountain driving. This weekend I'll give a shot at adjusting the ride height...

Thanks, Shad, for the advice. I'll try adjusting the height this weekend then. Good seeing you at NSXPO and at SMMR and thanks for all the help over the years so far. -CiaoBoy

I thought I read somewhere that coilovers, or any height-adjustable suspension, need to be corner-balanced after installation. http://www.nsxprime.com/FAQ/Performance/cornerbalance.htm -CiaoBoy

I didn't change the height settings from whatever came in the box. The left front looks lower, but the right front looks high. The left rear also looks high. I've got an appointment to do a height adjustment, an alignment, and corner balancing at Custom Alignment next week. -CiaoBoy

It was difficult separating the top hats off the OEM strut because of stubborn nuts. We had to use a rotary cutter on one of them to cut off the nut because the hex hole at the top got too rounded inside and the allen wrench couldn't keep it in place while trying to rotate the nut. -CiaoBoy

1) MikeC_587 2) iCEE 3) yojack1 +1 4) 02#154 +??? (but always brings 2 girls) 5) Dhalsim +1 6) NSX168 (Wesley & Angela) 7) Flaminino +1 8) BATMANs 9) BluryNSX (+1 ) 10) Sicarius82 11) Ted - Harbormaster 12) Sung (+1) 13) Chip 14) May 15) Don and Linda Templeton 16) Jill (DT Magic) +1 17) Chris...

I set them to KW's recommended settings for the NSX. I read Billy Johnson's posts on the subject and decided not to go any stiffer than those settings. The ride is slightly firmer than stock, but nowhere near a kidney buster. -CiaoBoy

Just wanted to say thanks to ChopsJazz for his hard work yesterday in removing my OEM shocks and springs, especially separating the top hats, and installing the KW V3 coilovers. Also thanks to Vytas for assisting. Ran into a couple of snafus during the process, but Ken was a trooper and...

Re: Meet at Automall in Fremont on FRIDAY night April 17th? 1) Edub 2) 02#154 3) MikeC_587 4) iCEE 5) LarryNSX 6) patchez 7) REDNSXT 8) BATMANs 9) wh(oo)zzbad 10) Ashik 11) BluryNSX (unless clutch is being changed) 12) slamstrom (will be there between8:30 and 9:00) 13) amgnsx (and son) 14)...

Dave, I'd like to take advantage of the free shipping offer and purchase a black tensioner before the deadline runs out. Sent you a PM earlier today. -CiaoBoy

I'm waiting for this one. Pioneer AVIC-F500BT http://www.pioneerelectronics.com/PUSA/PressRoom/Press+Releases/Navigation/Pioneer+Changes+the+Face+of+Navigation+with+New+Hybrid+System+and+Advanced+Voice+Recognition+for+Complete+Control+of+iPod+and+Bluetooth+Devices I assume it will be similar...

Has anyone had issues with their Odyssey batteries? I'm on my second one (which was replaced at no charge, since it was still under the warranty). I keep my battery hooked up to my CTEK 3300 which does pulse charging. This second Odyssey battery has gone dead too, and it won't recover...

Will the Kenwood not fit in the nav pod? I'd rather put it there, if at all possible. -CiaoBoy

Thanks. I'm not particular to the M770; it's just that I have no plans to use Bluetooth with the stereo system since I already have a bluetooth headset that I use. I just checked the specs and it looks like the M770 is an older design and the resolution is much lower than some of the more...