• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

BNIB 17/18 TE37 OG Bronze Double Concave + Center Caps

Status
Not open for further replies.
Do these fit under factory fenders?

They do, there are a few pictures floating around running 235/40 and 275/35 on stock fenders. Kodawaricollective has some nice pictures of these on the nsx.

https://www.instagram.com/p/CE6q8PenC5-
instagram: @kodawaricollective

*edit: not 100% sure if they are stock fenders in pic
 
Last edited:
I would not put put a 9 inch front wheel on my stock body 96...
 
I rub with 235/40/17 0n 8 inch wheels ...to mount a 215 on a 9 inch wheel is not optimal.
 
You would need a super aggressive stretch with a narrow tire to fit the stock fenders. I bet you could get them to fit but I wouldn’t.
 
You would need a super aggressive stretch with a narrow tire to fit the stock fenders. I bet you could get them to fit but I wouldn’t.

.right it would have to be the stance nation approach.....but with that low ET of 34 pushing the outer rim away from the centerline I gotta think this is more of a widebody set..
 
You would need a super aggressive stretch with a narrow tire to fit the stock fenders. I bet you could get them to fit but I wouldn’t.

Not for the feint of heart 😀,but not as stanced/stretched as you would think. Attached pic is with 235/40 front on stock fenders. It would look great with wide fenders too.
I can attach images again....updated post with pictures.
 

Attachments

  • E7B84ECA-E68B-4C70-9158-86B83508E9A2.jpg
    E7B84ECA-E68B-4C70-9158-86B83508E9A2.jpg
    341.2 KB · Views: 1,233
  • 41A9B029-28E4-4A21-9BB8-783FA813B7B3.jpg
    41A9B029-28E4-4A21-9BB8-783FA813B7B3.jpg
    259.8 KB · Views: 1,173
  • 22C5AEAE-990D-4A04-9047-BF52DF8C8CC0.jpg
    22C5AEAE-990D-4A04-9047-BF52DF8C8CC0.jpg
    128.9 KB · Views: 1,179
  • 69E3B324-A29A-4201-B930-4D429F33E764.jpeg
    69E3B324-A29A-4201-B930-4D429F33E764.jpeg
    140.7 KB · Views: 1,041
Last edited:
Thanks for the pics...That is what we need more of in the FS section...full disclosure on after market parts..
 
Status
Not open for further replies.
Back
Top