- Joined
- 3 May 2020
- Messages
- 180
Learn how to install Mugen pedals on your 91-05 Acura/Honda NSX. People have complained that the throttle pedal doesn't fit well...and it doesn't out of the box, so you have to think outside of the box (pun intended). Watch my video to see how you can properly install these pedals! As always, the special tools required for this job are below.
Required Items:
Mugen 5 Spd Pedals: https://www.kingmotorsports.com/p-225-mugen-sports-pedal-kit-mt.aspx
Tools:
-Drill & 1/8" drill bit-M4 x 0.7 tap: https://amzn.to/3HkJPsZ-Center Punch: https://amzn.to/3H3ugVc
-3mm & 2.5mm Allen wrenches (included with the kit)
0:00 - Introduction
1:08 - Removing stock pedal covers
1:33 - Installing Clutch & Brake Pedals
2:47 - Drilling Required?
6:24 - Installing the throttle pedal
Required Items:
Mugen 5 Spd Pedals: https://www.kingmotorsports.com/p-225-mugen-sports-pedal-kit-mt.aspx
Tools:
-Drill & 1/8" drill bit-M4 x 0.7 tap: https://amzn.to/3HkJPsZ-Center Punch: https://amzn.to/3H3ugVc
-3mm & 2.5mm Allen wrenches (included with the kit)
0:00 - Introduction
1:08 - Removing stock pedal covers
1:33 - Installing Clutch & Brake Pedals
2:47 - Drilling Required?
6:24 - Installing the throttle pedal
