I was going to list all of this in the parts for sale area but it is just too much stuff so instead its a garage sale. Email me for quickest response and detailed pictures. All parts can be picked up in So Cal or shipped at buyers expense.
GT Theory SV28 NSX Widebody kit(vacuum bag carbon/epoxy resin/core)-$6000 Front and rear bumpers, front fenders, side skirts, rear quarter panels. 1/2 the weight of stock aluminum panels.




GT Theory SV28 NSX Widebody kit (fiberglass)-$4000
Advan RS Gunmetal, 18x8 et 37 19x10 et 35, 225/35R18 and 315/25r19 Falken FK452 tires, like new-$2500\




Work Meister SZ2 Bright silver with polished lip, 17x8 et 45 18x10 et 43 215/40R17 and 285/35R18 Potenza S02 less than 1k miles, stickers can be removed form lips-$2000





some small minor scratches on one lip that should be able to be polished out
Roja Formula 7(Made by Rays Racing Japan) black chrome 18x8 et 45 19x10 et 45 225/35R18 and 305/30R19 Re050 with less than 1500 miles-SOLD
WP Pro EX-6 BBK front and rear with handbrake, black EX-6 3d calipers with titanium piston upgrade 360mm or 336mm-$4000 SOLD
OEM 2002 NSX fixed headlights with df brackets and harness plus aftermarket HID, oem rear bracket and rear caps-$1900 installed but never hooked up HOUSINGS SOLD
Downforce 02 conversion headlight brackets-$100SOLD

Downforce 02 headlight conversion wiring harness-100SOLD

Caps, seals and 2 bulbs for 02 headlight-50SOLD

Downforce NSX-R seats, black Alcantara with perforated center cushions(new)SOLD

SOS speed engineering NSX seat rails-SOLD
Route KS CHASSIS BRACES,RSTB and front lower chassis brace-$200 each(new)

Sorcery carbon door sills-350 pair(new)

AMW NSX turbo kit, GTX4088r, twin scroll gravity drain-SOLD

AEM EMS Series 1 version 2-SOLD (new)
OEM HOOD 91-01 $250
Backyard Special NSX-R hood 02-05 FRP-$600 sold
OEM front fenders that were widened for a prototype part, these would only be good if you were going to use them for a cut fender kit of some sort-SOLD
OEM rear fenders same as above-SOLD
Ferrari F360 gt replica mirrors we were going to retrofit to the NSX, FRP shell with glass-$600, these would look killer on an NSX I hope someone grabs these and throws them on a NSX.



Carbon Fiber engine cover with a few blems, no hardware. $175
Fiberglass engine cover, unsure who makes it. $350
Lightweight open ended Titanium lugnuts set of 20 burnt look-$250
Lightweight open end titanium lug nuts raw finish set of 20-$275
Any questions just ask. Thanks
GT Theory SV28 NSX Widebody kit(vacuum bag carbon/epoxy resin/core)-$6000 Front and rear bumpers, front fenders, side skirts, rear quarter panels. 1/2 the weight of stock aluminum panels.




GT Theory SV28 NSX Widebody kit (fiberglass)-$4000
Advan RS Gunmetal, 18x8 et 37 19x10 et 35, 225/35R18 and 315/25r19 Falken FK452 tires, like new-$2500\




Work Meister SZ2 Bright silver with polished lip, 17x8 et 45 18x10 et 43 215/40R17 and 285/35R18 Potenza S02 less than 1k miles, stickers can be removed form lips-$2000





some small minor scratches on one lip that should be able to be polished out

Roja Formula 7(Made by Rays Racing Japan) black chrome 18x8 et 45 19x10 et 45 225/35R18 and 305/30R19 Re050 with less than 1500 miles-SOLD




WP Pro EX-6 BBK front and rear with handbrake, black EX-6 3d calipers with titanium piston upgrade 360mm or 336mm-$4000 SOLD
OEM 2002 NSX fixed headlights with df brackets and harness plus aftermarket HID, oem rear bracket and rear caps-$1900 installed but never hooked up HOUSINGS SOLD
Downforce 02 conversion headlight brackets-$100SOLD

Downforce 02 headlight conversion wiring harness-100SOLD

Caps, seals and 2 bulbs for 02 headlight-50SOLD

Downforce NSX-R seats, black Alcantara with perforated center cushions(new)SOLD

SOS speed engineering NSX seat rails-SOLD
Route KS CHASSIS BRACES,RSTB and front lower chassis brace-$200 each(new)

Sorcery carbon door sills-350 pair(new)

AMW NSX turbo kit, GTX4088r, twin scroll gravity drain-SOLD

AEM EMS Series 1 version 2-SOLD (new)
OEM HOOD 91-01 $250
Backyard Special NSX-R hood 02-05 FRP-$600 sold
OEM front fenders that were widened for a prototype part, these would only be good if you were going to use them for a cut fender kit of some sort-SOLD
OEM rear fenders same as above-SOLD
Ferrari F360 gt replica mirrors we were going to retrofit to the NSX, FRP shell with glass-$600, these would look killer on an NSX I hope someone grabs these and throws them on a NSX.



Carbon Fiber engine cover with a few blems, no hardware. $175


Fiberglass engine cover, unsure who makes it. $350



Lightweight open ended Titanium lugnuts set of 20 burnt look-$250


Lightweight open end titanium lug nuts raw finish set of 20-$275



Any questions just ask. Thanks
Attachments
Last edited: