• Protip: Profile posts are public! Use Conversations to message other members privately. Everyone can see the content of a profile post.

List Of Parts For Sale !

Joined
7 April 2001
Messages
526
Location
SoCAL, CA , USA
Front Frame Suspension not powering steering - $1600 + s/h
Rear Frame Suspension no drive shaft - $1500 + s/h
Steering Column (with switches and plastics 1992) - $550 + s/h
HOLD Trunk Carpet with rubber seal (3 piece carpet) - $150 + s/h
SOLD Shifter Assembly with cables - $100 + s/h
SOLD Pedal Set Assembly (manual tranny) - $100 + s/h
Rocker Panels set (red)- $150 + s/h
SOLD Spoiler with LED (black) - $370 + s/h
Trunk Lid (black) - $450 + s/h
SOLD Set of 4 Factory Strut with Eibach springs (38k miles) - $325 + s/h
SOLD ECU (1993 manual) - $250 + s/h
SOLD ECU (1991 manual) - $250 + s/h
SOLD ECU (1992 manual) - $250 + s/h
HOLD Manual Tranny Control Unit (1991) - $100 + s/h
SRS Computer (1991 with sensors) - $40 + s/h
Driver Door complete no mirror (1993 Black) - $850 + s/h
Driver Door no interior panel with mirror (red 92) - $850 + s/h
HOLD Passenger Door complete no interior with mirror (red 92) - $950
HOLD Rear View Mirror - $20 + s/h
Rear Hatch Window with Frame - $750 + s/h
SOLD Antenna (1993) - $75 + s/h
Wiring Harness (rear section) - $150 + s/h
Wiring Harness (rear trunk section) - $70 + s/h
Rear Bumper Beam - $100
SOLD Rear Bumper Cover with all brackets and supports - $700 + s/h
Relays (any that I have) - $8 each + s/h
SOLD Throttle cable (very long) - $35 + s/h
Front Brake Caliper (pair) - $250 + s/h
Rear Brake Caliper (pair) - $225 + s/h
Parking Brake Handle (chrome part is chipped) - $30 + s/h
HOLD Front Bumper Beam (with washer fluid + motor) - $115 + s/h
Headliner (gray clean) - $100 + s/h
Dome Light (1993) - $15 + s/h
Seat Belt assembly - $75 (per side) + s/h
5 speed Tranny (snap ring range) - $1200 + s/h
SOLDThrottlebody - $250 + s/h
NOS Wet setup 6 fogger setup in box package NEW - $600 + s/h
Engine cover - $90 + s/h
SOLD Front Frame - $1500 + s/h
SOLD Center Frame
SOLD Rear Frame - $1500 + s/h
ABS System (in front hood complete system + lines) - $700 + s/h
Front Blower (under hood) - $100 + s/h
Coolant Hose (Metal) (middle of car long pipe) - $100 + s/h
Eibach springs (cut) - $70 + s/h
Fikse Mesa2 Rims (17/18) - $900 + s/h
A Pillar (exterior panel black) - $90 each + s/h
Flat Metal Plate that the battery sits on - $180 + s/h
Spare tire holder (metal) - $25 + s/h
SOLD Cruise control unit - $80 + s/h
Cruise control system - $120 + s/h
Wiper motors - $100 + s/h
SOLD Plastic cowl that covers the wiper motors - $50 + s/h
Gas filler metal tube - $35 + s/h
SOLDGas Tank - $100 + s/h
10mm bolts - 25 cents each + s/h
12mm bolts - 50 cents each - s/h
14mm bolts - 75 cents each - s/h
SOLD Brake Master Cylinder (1992) - $80 + s/h
SOLD Brake Boost (1992) - $120 + s/h
Brake Control Unit - $150 + s/h
SOLD SRS Wiring Harness (1992) - $25 + s/h
Condensor with plastic shroud and fan - $100 each + s/h
SOLD Stereo Deck - $75 + s/h
Exhaust Manifold set (1993) - $45 + s/h
SOLD Emissions Vapor Canister - $20 + s/h
SOLD Emissions Control Box - $80 + s/h
SOLD Interior Complete Rear Side Black(6 pieces) - $125 + s/h
HOLD Glass (Division of interior and motor 2pc 1992) - $200 + s/h
HOLD AirBag (passenger side 2001) - $400 + s/h

got lots of small stuff
 
Last edited:
email sent about Eibach springs :)
 
Yes I will post the pictures on a link and you should be able to see for yourself. Allow a day or two.

NSX Racer: The 6 fogger is not mine, it is my brother's so I have no idea how much he paided. I'm sure the price is less then what he paid for. This site is selling the same stuff. http://www.optauto.com/webstore/pro...&variation=&aitem=2&mitem=9&back=yes&dept=597

Joel: sorry no screws whoever took them off at the shop tore them all out!!! Those plastic screws are like $3 each from honda retail.

slipnby: The AC Vent I'll sell for 75% off the retail. So whatever the retail is knock off 75%. Most of the prices I posted are 75% off so more some less.

Brody: Pic will be coming soon

Ergozoom1: AC head unit already sold sorry.
 
Do you have the long plastic covering for the tunnel under the car?
 
Front Frame

My friend and I are interested in the front frame and sub-structure ( headlight and condensor mounting portion ). We are in the socal area ( orange and torrance ). My e-mail address is: [email protected] We would like to set up a time to meet with you and examine the parts described above. I can e-mail my number to you if you like.
 
nsxcc: Yes, but it is being sold as a complete set suspension. Look above for pricing.

[email protected]: You got mail

hchan710: You got mail

LORD MORTIS: You got mail

lowellhigh79: Yes I believe I have that part, let me find it just to be sure.

spike: Sorry I currently do not have one, the one I have is damaged on the bottom (a crack).
 
Im interested in whatever frame sections you may have for a design project I am working on. I need a frame that has a title(salvage, destruction, clean) doesnt matter, I just need one so that this project can eventually be put on the road. My email is [email protected]. Please reply with price.
 
HI, i need

1. front right inner fender plastic part.
2. top center console(the plastic part surround the center airvent)

Please email me the prices and payment info at [email protected].

thank.
 
Back
Top