Recent content by tonyb

Would like to thank both Hugo for his window repair expertise and Paul for hosting this event at his dealership - great improvement to the window operation. Windows work both smoother and much more quietly than the factory setup - well worth the cost. Echo Graeme's comments - great to put...

Thanks for the info, mskrotzki - Had called SOS between post and your update and they provided same response. Did order window guides JIC they were needed as door was already apart - have a passenger window rattle that I was hoping the guides would resolve. Does anyone have idea how much...

Was wondering about the billet regulator retainers - how can you tell if you need them? I have a '95 and couldn't tell from the thread if only needed on '91-93. If door is apart, seems like a good idea to replace. Any guidance? Thanks, TB

Hi guys - I'd be in on this and since I'm in FC, will drive to metro Denver. Cell # is (970) 692-1931. BTW - thanks for putting up the FB link djklitz - worked for me!

I have a '95 that the leather was looking kind of worn in spots and little stiff. My son works for a local auto dealer (No CO) and he recommended I have the guy that reconditions seats for the dealer do mine. I brought the car to them on the day they visited the dealer. It took about an hour...

Hi Robert - Craig Latzke has seen you around FC and was asking about you. Forwarded link to your profile to him. (I'm guy on HD w/nitrous that spoke with you at King Soopers last fall) TB

Custom build system from PFISpeed in Fort Collins, GT35R67 turbo, 530 rwhp, 440 ftlbs @11.5psi with air to water and low compression build, 9:1

Hi Robare - Followup from Sat - Just confirming I have correct address for you. It was great seeing another NSX on the road! TB

BTW - Don't want to mislead you re: my doing the engraving. ZEForged offered this as an option with their wheels. The factory ones were included with the wheels and the center caps were $35/ea shipped separately. Check with the wheel mfgr (or even a diff one if you can provide dimensions...

Just tried half dozen times to take pics of my caps but it's dark here and the flash bounce from a polished aluminum center cap made pics terrible. This may explain it, advise if image is not clear and I'll resubmit in daylight. Image 609 is the engraved/painted center cap Image 610 is the...

Morning, Am not sure what your centercap looks like, but I wanted same thing and took a diff approach. Have ZEForged Mesh wheels and had the center cap engraved with the Acura calipers and then hand painted with black and clear automotive paint. The cost of doing so was about $35/cap + two...

Hi Marc, I took that pic recently (w/in last three weeks) as that was when I got the car back to break-in. The pic in my profile is almost a year old and had the engine bay cover in place. You will also notice no engine bay cover as it's being redesigned. I do have a pipe reduction right...

Before reading about the US Marshall comment (makes sense) was thinking that this car was either (1) involved in a bitter divorce or (2) driven thru the Mojave dirt lot... TB

I've used this kit on three cars previously and it was quite durable. The US distributor used to be in Colorado Springs (I drove there to pick it up and the receptionist had to put the kit together) but think they are now in Chicago area. The first set lasted > 3yrs before I sold the car...

Hi Marc, Looks really nice. Is there a thermal advantage to putting the heat exchanger closer to inlet? The intake piping goes all way across the engine bay and am curious about the overall effect of your design. Side pic of my setup attached - it looks like less piping. Good luck! TB...