Search results

Just wanting to pick some brains and see if any extra power could be squeezed out of my setup. SOS Stage 1 Longblock 9.5:1 compression NA2 intake valves LMAs 2.1L blower Ported TB Oil pump gear I/E/H/HFC Flex fuel AEM Infinity Car pushes about 10-11psi depending on temp. Made 411whp on e85...

**for faster response, email: [email protected]** Using standalone ECU, no longer need this. $100 shipped and PayPal fees to the lower 48 $90 local SoCal pickup (92705)

**for faster response, email: [email protected]** Using a standalone ecu now, no longer need this. $300 shipped $280 local SoCal pickup (92705)

**for faster response, email: [email protected]** Selling my TEIN Monoflex coilovers. They only have about 15k miles and work great. Comes with adjustment tools and original manual. $1100 shipped and PayPal to the lower 48 $1000 for local SoCal pickup (92705)

My car is currently at SoS having work done, I’m upgrading to the 6 speed transmission so I’m selling my old 5-speed (removed by SoS). -65,948 miles on the transmission at the time of removal -Mechanically sound, no issues prior to removal -Transmission number is: J4A4-1000871, see attached...

**SOLD**Ordered these along with my TE37's but it turns out I don't need them. They are dedicated 5x114.3 70.1mm centerbore so they fit perfectly. I literally had them installed for a day and didn't need the extra wheel poke. VERY light markings from where the wheel mounted against it, condition...

**SOLD**Putting my lugs up for sale, only taken off the car 3 times. Each time was done very carefully by hand to not damage the anno. The only visible wear is a very small amount on each of the "corners" as well as on the tapered seat (see picture). Condition is 8.5-9/10. Originally purchased...

There are a few "should I leave black or not" threads out there already but I already intend to have the top repainted it's original black color since there are a few blemishes I'd like to eliminate. My question is this: will I need to replace any moulding or trim pieces in the process? Thanks...

BLUF: TCS & CEL come on when close to redline and engine reverts to safe mode (rich AFR's & lower redline) I'll try to make this as simple as I can :) Symptoms When accelerating, the TCS & CEL come on at the same time usually between 7500-8000RPM, afterwards the engine reverts back to a...

Car Throttle did a nice mini feature on my car, thought I would share :) http://www.carthrottle.com/readers-rides-staff-sergeant-kys-modified-nsx/

What are your thoughts? How do they fit? will they keep water out? (Dali says the CF ones may not?) My OEM ones are cracked and water will get in if I dont cover the rear bank when washing. Here's a link to the aluminum ones...

***SOLD***I recently acquired a series 1 EMS from my local tuner, the original owner thought something was wrong with it so they sent it to AEM to "fix" it. Well turns out it was user error the whole time, but AEM still checked all of the pins and the functionality, as well as install the late...

I'm looking to upgrade my wheels and have little hope in finding the exact fittment/color i want used, so I've decided to buy new. Evasive offers a military discount and can order a set for roughly 3300-3400 (with special color option, no cetercaps). Anyone know of anywhere cheaper? I really...

Looking for the above specs or as close as possible. Thanks! Tires optional

Pretty cool I think

I was driving back from lunch today and my car suddenly died about 1/2 mile from work. It's a '91 and CTSC'd about 3k miles ago. I've been driving it all week without issue and did a quick diagnostic. I have the SoS fuel pressure gauge installed on my fuel filter, when I turn the key to the...

Have an extra coolant tank cap for sale. It's .9 bar (OEM is 1.1) So it relieves at lower pressure, prolonging the life of your coolant hoses. This should not affect the coolant properties unless you heavily track your car. $30 shipped

OEM coolant bootle for sale from my '91, I replaced with an aluminum one. No cracks and the engine cover has never been removed. 8.5/10 condition. $50 shipped to the lower 48

SOLD Up for sale is the oem rear window garnish off my '91 since I replaced it with a downforce one. It is slightly faded with a scratch along the back that isn't visible unless the trunk is opened. Overall condition is about 7/10. No cracks $75 shipped, piece is boxed and ready to go.

So my '91 5spd tranny has about 60k on the clock and sometimes is hard to shift. It's not in the snap ring range and its only difficult sometimes when driving hard, fine when cruising and shifting slow. My guess is the syncros are a little worn, possibly from previous owners beating on it? To...

Selling my used mats, condition is about 4.5/10 for the driver side and 5.5/10 for the passenger side. The plastic tabs were cut off on the passenger side because they were pretty bent up. New mats are $300, selling these for $50 shipped. Thanks for looking :)

Since there aren't any aftermarket engine supports available that I know of, I decided to polish mine. It's a nice little dress up project if you have a few hours to spare. I just used progressively finer sand paper down to about 1500 grit. Results look pretty good!

In theory it should work right? Since the motor will sense the lower intake temps and not pull as much timing, similar to driving in cold weather vs summer weather. Is there something I'm missing? Obviously EMS would maximize the efficiency.

Door triangle trim piece that goes on the top front portion of the drivers side (LHD) Brand new, taken out of package once to compare, never installed. $35 shipped to lower 48 SOLD!! Driver side interior door handle/latch, perfect working order, just some minor knicks/scratches (see...

One of my main goals is to have my own magazine feature one day and I've seen a couple members in the past that have had one. What did it take to get there? What magazine were you in? How were you able to get a foot in the door? I currently know a photographer who has done numerous features in...