Search results

Per forum rules

Honcho - Apologies, I will retake the photo as required and post (y) Koz - I’ll send you info after I fix the post Thanks

I have an unopened bag of red Techna-Fit NSX100 braided brake lines for NSX 1991-1996. Looking online these usually go for $100-$115 ? PalPay me $50 plus the actual cost to ship (via Pirate Ship - USA only) and they're yours! Or local pickup in Los Angeles area. Message me with questions.

The dash surround around the clock and A/C vents on my '94 cracked due to sun damage, so I replaced the entire surround/vent assembly (the only way you can get this item). The vent/deflectors were working perfectly, so I have these available for anyone unfortunate enough to have broken...

Ronnie / Irvine Auto Center does it again Required to smog my '94 with CTSC again (last time was 2019, see my post above). Returned to Ronnie at Irvine Auto Center and he took great care of me and the car. Test was passed with flying colors (it's a CLEAN motor even at 137k miles and with...

I have '94 with CTSC, Comptech headers and cat-back, original cats. Have passed CA smog every time in the past, including 2013, 2015, 2017 with the CTSC. But I was bumping the numbers (particularly NOx) and hadn't driven the car much lately - although it was running great. My 2019 reg said I...

Anyone? Lots of views?

Looking for a good condition driver's side knee bolster - the one you took out of your track monster looking to save the few oz.... :-) Willing to pay top $ for a clean one.... Cheers Mark

Dali Super Hot Chip is an upgrade for '91-'94 ECU, delivers more power and higher rev limit. Used this in my '94 for several years and loved it - no downside. Upgraded to CTSC so back to the stock ECU chip now. This chip has been carefully handled by an electronics expert (me), if it doesn't...

Looking for a clean knee bolster (black) to replace on my '94. Need all (or most) of the locating pins intact. I'm sure you took yours off for weight reduction, I'll give you cold hard ca$h for it!!!

CA car - "ANSXLVR". Wife doesn't like the attention she gets driving it.

Ok, I screwed up, I've misplaced my OEM ECU Chip after upgrading to Dali power chip (which I've enjoyed for several years) and I'm now going to a CTSC setup so I need the original chip :-( Looking to buy a good standard part from someone who has upgraded, or swap you for the Dali part. Cheers -

thanks to all for the recommendations, I'm finalizing my list and dropping hints to my check book...

Had my red '94 since '98 and can't part with it. Was my daily driver from '98 until this year, now I'm commuting in a natural gas Civic GX (love it). It's running well, but needs a variety of restoration work, such as: - Paint (black roof is toast, body is ok but needs at least a good...

Brand new, never installed Dali CF B-pillar garnish pieces (2). Save weight and look cool. Price: $200 plus shipping $10. Or make offer. Willing to trade for a good lower driver's side dash panel (the one the key sticks through). Cheers - Mark

Thanks gents, I'll get an appointment and get aligned! cheers Mark

I have a '94 NSX which is my (incredible) daily driver. The last 2 sets of tires have had very bad wear on the inside shoulders (same on both sides - only the shoulder is worn, the other ~75% of the tread is barely worn). After I noticed this with the first set of tires I searched for somewhere...

Well, this is a serious post... I had a friend ride in my '94 - he's a big guy but not obese by any stretch - 6' 2" and maybe 200lbs - when he got out he leaned on the side skirt (stock) and BROKE IT IN HALF!!!! Cost me $500 or so to fix it. Since then I tell all riders to swing BOTH feet out...

I have these exact same symptoms on my '94! I'll try the brake pedal trick - what is the permanent fix? Mark

I want to find a good NSX tech in the Pasadena/Foothill/San Dimas area of LA - any recommendations?? thanks Mark

What Nitrous Kit? What nitrous equipment are you using? How was the installation?