- Joined
- 14 December 2006
- Messages
- 71
there may be a post somewhere on this but i couldn't find it, so if anyone has a link, that will work too....
putting an abs from a 1997 into a 1991.... the brake lines do not match up and the wiki page says "you will have to re-bend the hard brake lines to the brake master cylinder"
any tips or tricks to make sure the lines don't get kinked or broke when doing this ?
thank you in advance.....
putting an abs from a 1997 into a 1991.... the brake lines do not match up and the wiki page says "you will have to re-bend the hard brake lines to the brake master cylinder"
any tips or tricks to make sure the lines don't get kinked or broke when doing this ?
thank you in advance.....